كلوريد الحديد الثلاثي
| |||
| |||
| الأسماء | |||
|---|---|---|---|
| اسم أيوپاكs
Iron(III) chloride
Iron trichloride | |||
أسماء أخرى
| |||
| المُعرِّفات | |||
| رقم CAS | |||
3D model (JSmol)
|
|||
| ChEBI | |||
| ChemSpider | |||
| ECHA InfoCard | 100.028.846 
| ||
| رقم EC |
| ||
PubChem CID
|
|||
| رقم RTECS |
| ||
| UNII |
| ||
| UN number |
| ||
CompTox Dashboard (EPA)
|
|||
| |||
| |||
| الخصائص | |||
| الصيغة الجزيئية | FeCl 3 | ||
| كتلة مولية |
| ||
| المظهر | Green-black by reflected light; purple-red by transmitted light; yellow solid as hexahydrate; brown as aqueous solution | ||
| الرائحة | Slight HCl | ||
| الكثافة |
| ||
| نقطة الانصهار | |||
| نقطة الغليان | |||
| قابلية الذوبان في الماء | 912 g/L (anhydrous or hexahydrate, 25 °C)[1] | ||
| قابلية الذوبان في |
| ||
| القابلية المغناطيسية | +13,450·10−6 cm3/mol[2] | ||
| اللزوجة | 12 cP (40% solution) | ||
| المخاطر[4][5][Note 1] | |||
| صفحة بيانات السلامة | ICSC | ||
| ن.م.ع. مخطط تصويري |  
| ||
| ن.م.ع. كلمة الاشارة | DANGER | ||
| H290, H302, H314 | |||
| P234, P260, P264, P270, P273, P280, P301+P312, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P390, P405, P406, P501 | |||
| NFPA 704 (معيـَّن النار) | |||
| نقطة الوميض | Non-flammable | ||
| حدود التعرض الصحية بالولايات المتحدة (NIOSH): | |||
REL (الموصى به)
|
TWA 1 mg/m3[3] | ||
| مركبات ذا علاقة | |||
أنيونات أخرى
|
|||
كاتيونات أخرى
|
|||
coagulants ذات العلاقة
|
|||
| البنية | |||
| البنية البلورية | Hexagonal, hR24 | ||
| الزمرة الفراغية | R3, No. 148[7] | ||
| ثابت العقد | a = 0.6065 nm, b = 0.6065 nm, c = 1.742 nm | ||
| ثابت العقد | α = 90°, β = 90°, γ = 120° | ||
| Octahedral | |||
ما لم يُذكر غير ذلك، البيانات المعطاة للمواد في حالاتهم العيارية (عند 25 °س [77 °ف]، 100 kPa). | |||
 verify (what is  ?)
| |||
| مراجع الجدول | |||
_chloride_anhydrate.jpg&filetimestamp=20230810114716&)
Iron(III) chloride describes the inorganic compounds with the formula FeCl
3(H2O)x. Also called ferric chloride, these compounds are available both in anhydrous and hydrated forms which are both hygroscopic. They are common sources of iron in its +3 oxidation state. The anhydrous derivative is a Lewis acid, while the hydrate is a mild oxidizing agent. It is used as a water cleaner and as an etchant for metals.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
البنية والخصائص
All forms of ferric chloride are paramagnetic, owing to the presence of five unpaired electrons residing in 3d orbitals. This electronic configuration places electrons in molecular orbitals that are antibonding with respect to ligands. Thus, iron(III) chlorides are labile, undergoing rapid ligand exchange in solution. In contrast to their kinetic lability, iron(III) chlorides are thermodynamically robust, as reflected by the vigorous methods applied to their synthesis.[8][9]
اللامائي
The anhydrous compound is a hygroscopic crystalline solid with a melting point of 307.6 °C. The colour depends on the viewing angle: by reflected light, the crystals appear dark green, but by transmitted light, they appear purple-red. Anhydrous iron(III) chloride has the BiI
3 structure, with octahedral Fe(III) centres interconnected by two-coordinate chloride ligands.[7][10]
Iron(III) chloride has a relatively low melting point and boils at around 315 °C. The vapor consists of the dimer Fe
2Cl
6 (like aluminium chloride) which increasingly dissociates into the monomeric FeCl
3 (with D3h point group molecular symmetry) at higher temperatures, in competition with its reversible decomposition to give iron(II) chloride and chlorine gas.[11]
الهيدرات
In addition to the anhydrous material, ferric chloride aggressively forms hydrates upon exposure to water, reflecting its Lewis acidity. Four of these hydrates have been crystallized and examined by X-ray crystallography. They all exhibit deliquesce and feature trans-[FeCl
2(H
2O)
4]+
cations, with either chloride or [FeCl
4]−
as the anions.[8]
- dihydrate: FeCl
3·2H2O has the structural formula trans-[FeCl
2(H
2O)
4][FeCl
4]. - FeCl
3·2.5H2O has the structural formula cis-[FeCl
2(H
2O)
4][FeCl
4]·H2O. - FeCl
3·3.5H2O has the structural formula cis-[FeCl
2(H
2O)
4][FeCl
4]·3H2O. - hexahydrate: FeCl
3·6H2O has the structural formula trans-[FeCl
2(H
2O)
4]Cl·2H2O.[12]
المحلول
_chloride_2.JPG&filetimestamp=20230810114654&)
Aqueous solutions of ferric chloride are characteristically yellow, in contrast to the pale pink solutions of [Fe(H
2O)
6]3+. Thus, the chloride ligand significantly influences the optical properties of the iron center. According to spectroscopic measurements, the main species in aqueous solutions of ferric chloride are the octahedral [FeCl
2(H
2O)
4]+
(stereochemistry unspecified) and the tetrahedral [FeCl
4]−
.[8] The cationic aquo complex is strongly acidic:[13][8]
- [FeCl
2(H
2O)
4)]+
⇌ [FeCl
2(OH)(H
2O)
3] + H+
Anhydrous iron(III) chloride dissolves in diethyl ether and tetrahydrofuran forming 1:2 adducts of the formula FeCl3(ether)2. In these complexes, the iron is pentacoordinate.[14]
التحضير
Several hundred thousand kilograms of anhydrous iron(III) chloride are produced annually. The principal method called direct chlorination, uses scrap iron as a precursor:[10]
- 2 Fe + 3 Cl
2 → 2 FeCl
3
The reaction is conducted at several hundred degrees such that the product is gaseous. Using excess chlorine guarantees that the intermediate ferrous chloride is converted to the ferric state.[10] A similar but laboratory-scale process also has been described.[15][16]
Solutions of iron(III) chloride are produced industrially both from iron and from ore, in a closed-loop process.[10]
- Dissolving iron ore in hydrochloric acid
- Fe
3O
4 + 8 HCl → FeCl
2 + 2 FeCl
3 + 4 H
2O
- Fe
- Oxidation of iron(II) chloride with chlorine
- 2 FeCl
2 + Cl
2 → 2 FeCl
3
- 2 FeCl
- Oxidation of iron(II) chloride with oxygen and hydrochloric acid
- 4 FeCl
2 + O
2 + 4 HCl → 4 FeCl
3 + 2 H
2O
- 4 FeCl
Heating hydrated iron(III) chloride does not yield anhydrous ferric chloride. Instead, the solid decomposes into hydrochloric acid and iron oxychloride. Hydrated iron(III) chloride can be converted to the anhydrous form by treatment with thionyl chloride.[17] Similarly, dehydration can be done with trimethylsilyl chloride:[18]
- FeCl
3·6H2O + 12 (CH
3)
3SiCl → FeCl
3 + 6 ((CH
3)
3Si)
2O + 12 HCl
التفاعلات
The reactivity of ferric chloride reveals two trends: It is a Lewis acid and an oxidizing agent.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
تفاعلات أحماض لويس
Reactions of iron(III) chlorides reflect the description of iron(III) as oxophilic and a hard Lewis acid. The rapidity of these reactions is consistent with the lability of the ferric ion, reflecting its typical high-spin electronic configuration. Thus, oxalate salts react rapidly with aqueous iron(III) chloride to give [Fe(C
2O
4)
3]3−, known as ferrioxalate. Other carboxylate sources, e.g., citrate and tartrate, bind as well to give carboxylate complexes. The affinity of iron(III) for oxygen ligands was the basis of qualitative tests for phenols. Although superseded by spectroscopic methods, the ferric chloride test is a traditional colorimetric test.[19] The affinity of iron(III) for phenols is exploited in the Trinder spot test.
Myriad other manifestations of the oxophiliicty of iron(III) chloride are available. When heated with iron(III) oxide at 350 °C it reactions to give iron oxychloride:[20]
- FeCl
3 + Fe
2O
3 → 3FeOCl
Alkali metal alkoxides react to give the iron(III) alkoxide complexes. These products have more complicated structures than anhydrous iron(III) chloride.[21][22] In the solid phase a variety of multinuclear complexes have been described for the nominal stoichiometric reaction between FeCl
3 and sodium ethoxide:
- FeCl
3 + 3 CH
3CH
2ONa → "Fe(OCH
2CH
3)
3" + 3 NaCl
Iron(III) chloride forms a 1:2 adduct with Lewis bases such as triphenylphosphine oxide; e.g., FeCl
3(OP(C
6H
5)
3)
2. The related 1:2 complex FeCl
3(OEt
2)
2, where Et = C
2H
5), has been crystallized from ether solution.[14]
Iron(III) chloride also reacts with tetraethylammonium chloride to give the yellow salt of the tetrachloroferrate ion ((Et
4N)[FeCl
4]). Similarly combining FeCl3 with NaCl and KCl gives Na[FeCl
4] and K[FeCl
4], respectively.[23]
In addition to these simple stoichiometric reactions, the Lewis acidity of ferric chloride enables its use in a variety of acid-catalyzed reactions as described below in the section on organic chemistry.[10]
تفاعلات الاختزال
Iron(III) chloride is a oxidizing agent. A simple illustration is its tendency to release chlorine when heated above 160 °C:[16]
- 2FeCl
3 → 2FeCl
2 + Cl
2
It also serves as a one-electron oxidant illustrated by its reaction with copper(I) chloride to give copper(II) chloride and iron(II) chloride.
- FeCl
3 + CuCl → FeCl
2 + CuCl
2
In a comproportionation reaction, iron(III) chloride reacts with iron powder to form iron(II) chloride:[10]
- 2 FeCl
3 + Fe → 3 FeCl
2
A traditional synthesis of anhydrous ferrous chloride is the reduction of FeCl3 with chlorobenzene:[24]
- 2 FeCl
3 + C
6H
5Cl → 2 FeCl
2 + C
6H
4Cl
2 + HCl
كيمياء الفلزات العضوية
The interaction of anhydrous iron(III) chloride with organolithium and organomagnesium compounds has been examined often. These studies are enabled because of the solubility of FeCl3 in ethereal solvents, which are compatible with the nucleophilic alkylating agents. Such studies may be relevant to the mechanism of FeCl3-catalyzed cross-coupling reactions.[25] The isolation of organoiron(III) intermediates requires low-temperature reactions, lest the [FeR4]- intermediates degrade. Using methylmagnesium bromide as the alkylation agent, salts of Fe(CH3)4]- have been isolated.[26] Illustrating the sensitivity of these reactions, methyl lithium LiCH
3 reacts with iron(III) chloride to give lithium tetrachloroferrate(II) Li
2[FeCl
4]:[27]
- 2 FeCl
3 + LiCH
3 → FeCl
2 + Li[FeCl
4] + 0.5 CH
3CH
3 - Li[FeCl
4] + LiCH
3 → Li
2[FeCl
4] + 0.5 CH
3CH
3
To a significant extent, iron(III) acetylacetonate and related beta-diketonate complexes are more widely used than FeCl3 as ether-soluble sources of ferric ion.[28] These diketonate complexes have the advantages that they do not form hydrates, unlike iron(III) chloride, and they are more soluble in relevant solvents.[25] Cyclopentadienyl magnesium bromide undergoes a complex reaction with iron(III) chloride, resulting in ferrocene:[29]
- 3 C
5H
5MgBr + FeCl
3 → Fe(C
5H
5)
2 + 1/n (C
5H
5)
n + 3 MgBrCl
This conversion, although not of practical value, was important in the history of organometallic chemistry where ferrocene is emblematic of the field.[30]
الاستخدامات
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
المعالجة المائية
In the largest application iron(III) chloride is used in sewage treatment and drinking water production as a coagulant and flocculant.[31] In this application, an aqueous solution of FeCl
3 is treated with base to form a floc of iron(III) hydroxide (Fe(OH)
3), also formulated as FeO(OH) (ferrihydrite). This floc facilitates the separation of suspended materials, clarifying the water.[10]
Iron(III) chloride is also used to remove soluble phosphate from wastewater. Iron(III) phosphate is insoluble and thus precipitates as a solid.[32] One potential advantage to its use in water treatment, ferric ion oxidizes (deodorizes) hydrogen sulfide.[33]
النقش وتنظيم المعدن
It is also used as a leaching agent in chloride hydrometallurgy,[34] for example in the production of Si from FeSi (Silgrain process by Elkem).[35]
In another commercial application, a solution of iron(III) chloride is useful for etching copper according to the following equation:
- 2 FeCl
3 + Cu → 2 FeCl
2 + CuCl
2
The soluble copper(II) chloride is rinsed away, leaving a copper pattern. This chemistry is used in the production of printed circuit boards (PCB).[9]
Iron(III) chloride is used in many other hobbies involving metallic objects.[36][37][38][39][40]
الكيمياء العضوية
_chloride_2.JPG&filetimestamp=20230810114654){kind=link}
In industry, iron(III) chloride is used as a catalyst for the reaction of ethylene with chlorine, forming ethylene dichloride (1,2-dichloroethane):[41]
- H
2C=CH
2 + Cl
2 → ClCH
2CH
2Cl
Ethylene dichloride is a commodity chemical, which is mainly used for the industrial production of vinyl chloride, the monomer for making PVC.
Several reagents for organic synthesis have been developed based especially on anhydrous iron(III) chloride:
- Ferric chloride on silica gel is a reagent that has high reactivity towards several oxygen-containing functional groups. When the reagent is dry, its acidity and high affinity for water lead to dehydration and pinacol-type rearrangement reactions. When the reagent is moistened, it instead induces hydrolysis or epimerization reactions.[42]
- Ferric chloride on alumina is used to accelerate ene reactions.[43]
- Ferric chloride in conjunction with NaI in acetonitrile solution reduces organic azides to primary amines.[44]
- When mixed with sodium hydride, iron(III) chloride gives a hydride reducing agent. This reagent has been shown to convert alkenes and ketones into alkanes and alcohols, respectfully.[45]
As a reagent in organic chemistry, iron(III) chloride has attracted interest for both its redox activity and its Lewis acidity. Furthermore, because they are inexpensive and relatively nontoxic, iron chlorides have been widely examined.[28] Illustrating it use as a Lewis acid, iron(III) chloride catalyses electrophilic aromatic substitution and chlorinations. In this role, its function is similar to that of aluminium chloride. In some cases, mixtures of the two are used.[46] Iron(III) chloride oxidizes naphthols to naphthoquinones:[28][47]
علم الأنسجة
Iron(III) chloride is a component of useful stains, such as Carnoy's solution, a histological fixative with many applications. Also, it is used to prepare Verhoeff's stain.[48]
السلامة
Anhydrous iron(III) chloride is harmful, highly corrosive, and acidic.[28] Soluble iron(III) salts irritate the eyes, skin, mucous membrane, and induce abdominal pain, diarrhea, and vomiting when ingested.[49]
التواجد الطبيعي
FeCl
3 naturally occurs as the rare mineral molysite, usually related to volcanic and other-type fumaroles.[50][51]
FeCl
3 is also produced as an atmospheric salt aerosol by a reaction between iron-rich dust and hydrochloric acid from sea salt. This iron salt aerosol causes about 5% of naturally-occurring oxidization of methane and is thought to have a range of cooling effects.[52]
The clouds of Venus are hypothesized to contain approximately 1% FeCl
3 dissolved in sulfuric acid.[53][54]
ملاحظات
المراجع
- ^ أ ب ت ث ج خطأ استشهاد: وسم
<ref>غير صحيح؛ لا نص تم توفيره للمراجع المسماةcrc - ^ Haynes, William M., ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). Boca Raton, FL: CRC Press. p. 4.133. ISBN 1439855110.
- ^ NIOSH Pocket Guide to Chemical Hazards 0346
- ^ قالب:GHS class NZ
- ^ Various suppliers, collated by the Baylor College of Dentistry, Texas A&M University. (accessed 2010-09-19)
- ^ قالب:GHS class JP
- ^ أ ب Hashimoto S, Forster K, Moss SC (1989). "Structure refinement of an FeCl3 crystal using a thin plate sample". J. Appl. Crystallogr. 22 (2): 173–180. doi:10.1107/S0021889888013913.
- ^ أ ب ت ث Simon A. Cotton (2018). "Iron(III) Chloride and Its Coordination Chemistry". Journal of Coordination Chemistry. 71 (21): 3415–3443. doi:10.1080/00958972.2018.1519188. S2CID 105925459.
- ^ أ ب Greenwood NN, Earnshaw A (1997). Chemistry of the Elements (2nd ed.). Oxford: Butterworth-Heinemann. p. 1084. ISBN 9780750633659.
- ^ أ ب ت ث ج ح خ Wildermuth, Egon; Stark, Hans; Friedrich, Gabriele; Ebenhöch, Franz Ludwig; Kühborth, Brigitte; Silver, Jack; Rituper, Rafael (2000). "Iron Compounds". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a14_591. ISBN 3527306730.
- ^ Holleman AF, Wiberg E (2001). Wiberg N (ed.). Inorganic Chemistry. San Diego: Academic Press. ISBN 978-0-12-352651-9.
- ^ Lind, M. D. (1967). "Crystal Structure of Ferric Chloride Hexahydrate". The Journal of Chemical Physics. 47 (3): 990–993. Bibcode:1967JChPh..47..990L. doi:10.1063/1.1712067.
- ^ Housecroft, C. E.; Sharpe, A. G. (2012). Inorganic Chemistry (4th ed.). Prentice Hall. p. 747. ISBN 978-0-273-74275-3.
- ^ أ ب Spandl, Johann; Kusserow, M.; Brüdgam, I. (2003). "Alkoxo-Verbindungen des dreiwertigen Eisen: Synthese und Charakterisierung von [Fe2(Ot Bu)6], [Fe2Cl2(Ot Bu)4], [Fe2Cl4(Ot Bu)2] und [N(n Bu)4]2[Fe6OCl6(OMe)12]". Zeitschrift für anorganische und allgemeine Chemie. 629 (6): 968–974. doi:10.1002/zaac.200300008.
- ^ Tarr BR, Booth HS, Dolance A (1950). Anhydrous Iron(III) Chloride. Inorganic Syntheses. Vol. 3. pp. 191–194. doi:10.1002/9780470132340.ch51.
- ^ أ ب H. Lux (1963). "Iron (III) Chloride". In G. Brauer (ed.). Handbook of Preparative Inorganic Chemistry, 2nd Ed. Vol. 2. NY,NY: Academic Press. p. 1492.
- ^ Pray AR, Heitmiller RF, Strycker S, et al. (1990). "Anhydrous Metal Chlorides". Inorganic Syntheses. Vol. 28. pp. 321–323. doi:10.1002/9780470132593.ch80. ISBN 9780470132593.
- ^ Boudjouk P, So JH, Ackermann MN, et al. (1992). "Solvated and Unsolvated Anhydrous Metal Chlorides from Metal Chloride Hydrates". Inorganic Syntheses. Inorganic Syntheses. Vol. 29. pp. 108–111. doi:10.1002/9780470132609.ch26. ISBN 9780470132609.
- ^ Furniss BS, Hannaford AJ, Smith PW, et al. (1989). Vogel's Textbook of Practical Organic Chemistry (5th ed.). New York: Longman/Wiley. ISBN 9780582462366.
- ^ Kikkawa S, Kanamaru F, Koizumi M, et al. (1984). "Layered Intercalation Compounds". In Holt SL Jr (ed.). Inorganic Syntheses. John Wiley & Sons, Inc. pp. 86–89. doi:10.1002/9780470132531.ch17. ISBN 9780470132531.
- ^ Turova NY, Turevskaya EP, Kessler VG, et al., eds. (2002). "12.22.1 Synthesis". The Chemistry of Metal Alkoxides. Springer Science. p. 481. ISBN 0306476576.
- ^ Bradley DC, Mehrotra RC, Rothwell I, et al. (2001). "3.2.10. Alkoxides of later 3d metals". Alkoxo and aryloxo derivatives of metals. San Diego: Academic Press. p. 69. ISBN 9780121241407. OCLC 162129468.
- ^ Cook, Charles M. Jr.; Dunn, Wendell E. Jr. (1961). "The Reaction of Ferric Chloride with Sodium and Potassium Chlorides". J. Phys. Chem. 65 (9): 1505–1511. doi:10.1021/j100905a008.
- ^ P. Kovacic and N. O. Brace (1960). "Iron(II) Chloride". Inorganic Syntheses. Inorganic Syntheses. Vol. 6. pp. 172–173. doi:10.1002/9780470132371.ch54. ISBN 9780470132371.
- ^ أ ب Mako, T. L.; Byers, J. A. (2016). "Recent Advances in Iron-Catalysed Cross Coupling Reactions and Their Mechanistic Underpinning". Inorganic Chemistry Frontiers. 3 (6): 766–790. doi:10.1039/C5QI00295H.
- ^ Sears, Jeffrey D.; Muñoz, Salvador B.; Cuenca, Maria Camila Aguilera; Brennessel, William W.; Neidig, Michael L. (2019). "Synthesis and Characterization of a Sterically Encumbered Homoleptic Tetraalkyliron(III) Ferrate Complex". Polyhedron. 158: 91–96. doi:10.1016/j.poly.2018.10.041. PMC 6481957. PMID 31031511. and references therein.
- ^ Berthold HJ, Spiegl HJ (1972). "Über die Bildung von Lithiumtetrachloroferrat(II) Li2FeCl4 bei der Umsetzung von Eisen(III)-chlorid mit Lithiummethyl (1:1) in ätherischer Lösung". Z. Anorg. Allg. Chem. (in الألمانية). 391 (3): 193–202. doi:10.1002/zaac.19723910302.
- ^ أ ب ت ث White, Andrew D.; Gallou, Fabrice (2006). "Iron(III) Chloride". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.ri054.pub2. ISBN 0471936235.
- ^ Kealy TJ, Pauson PL (1951). "A New Type of Organo-Iron Compound". Nature. 168 (4285): 1040. Bibcode:1951Natur.168.1039K. doi:10.1038/1681039b0. S2CID 4181383.
- ^ Pauson PL (2001). "Ferrocene—how it all began". Journal of Organometallic Chemistry. 637–639: 3–6. doi:10.1016/S0022-328X(01)01126-3.
- ^ Water Treatment Chemicals (PDF). Akzo Nobel Base Chemicals. 2007. Archived from the original (PDF) on 13 August 2010. Retrieved 26 Oct 2007.
- ^ "Phosphorus Treatment and Removal Technologies" (PDF). Minnesota Pollution Control Agency. June 2006.
- ^ Prathna, T. C.; Srivastava, Ankit (2021). "Ferric chloride for odour control: studies from wastewater treatment plants in India". Water Practice and Technology. 16 (1): 35–41. doi:10.2166/wpt.2020.111. S2CID 229396639.
- ^ Park KH, Mohapatra D, Reddy BR (2006). "A study on the acidified ferric chloride leaching of a complex (Cu–Ni–Co–Fe) matte". Separation and Purification Technology. 51 (3): 332–337. doi:10.1016/j.seppur.2006.02.013.
- ^ Dueñas Díez M, Fjeld M, Andersen E, et al. (2006). "Validation of a compartmental population balance model of an industrial leaching process: The Silgrain process". Chem. Eng. Sci. 61 (1): 229–245. Bibcode:2006ChEnS..61..229D. doi:10.1016/j.ces.2005.01.047.
- ^ "Safer Printmaking—Intaglio". University of Saskatchewan.
- ^ Harris, Paul; Hartman, Ron; Hartman, James (November 1, 2002). "Etching Iron Meteorites". Meteorite Times. Retrieved October 14, 2016.
- ^ Lockwood, Mike. "A message about mirror coating and recoating".
- ^ "Buffalo Nickel No Date Value Guides (Year Reveal Tutorial)". 4 January 2023.
- ^ Scott, David; Schwab, Roland (2019). "3.1.4. Etching". Metallography in Archaeology and Art. Cultural Heritage Science. Springer. doi:10.1007/978-3-030-11265-3. ISBN 978-3-030-11265-3. S2CID 201676001.
- ^ Dreher, Eberhard-Ludwig; Beutel, Klaus K.; Myers, John D.; Lübbe, Thomas; Krieger, Shannon; Pottenger, Lynn H. (2014). "Chloroethanes and Chloroethylenes". Ullmann's Encyclopedia of Industrial Chemistry. pp. 1–81. doi:10.1002/14356007.o06_o01.pub2. ISBN 9783527306732.
- ^ White, Andrew D. (2001). "Iron(III) Chloride-Silica Gel". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.ri059. ISBN 0471936235.
- ^ White, Andrew D. (2001). "Iron(III) Chloride-Alumina". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.ri057. ISBN 0471936235.
- ^ Kamal A, Ramana K, Ankati H, et al. (2002). "Mild and efficient reduction of azides to amines: synthesis of fused [2,1-b]quinazolines". Tetrahedron Lett. 43 (38): 6861–6863. doi:10.1016/S0040-4039(02)01454-5.
- ^ White, Andrew D. (2001). "Iron(III) Chloride-Sodium Hydride". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.ri060. ISBN 0471936235.
- ^ Riddell, W. A.; Noller, C. R. (1932). "Mixed Catalysis in the Friedel and Crafts Reaction. The Yields in Typical Reactions using Ferric Chloride–Aluminum Chloride Mixtures as Catalysts". J. Am. Chem. Soc. 54 (1): 290–294. doi:10.1021/ja01340a043.
- ^ Louis F. Fieser (1937). "1,2-Naphthoquinone". Organic Syntheses. 17: 68. doi:10.15227/orgsyn.017.0068.
- ^ Mallory; Sheehan; Hrapchak (1990). Carson, Freida; Cappellano, Christa Hladik (eds.). Verhoeff's Elastic Stain. Chicago: ASCP Press. Retrieved 2 January 2013 – via The Visible Mouse Project, U.C. Davis.
{{cite encyclopedia}}:|work=ignored (help) - ^ "Iron salts (soluble, as Fe)". Centers for Disease Control and Prevention. The National Institute for Occupational Safety and Health. Retrieved 21 June 2023.
- ^ "Molysite". www.mindat.org.
- ^ "List of Minerals". www.ima-mineralogy.org. March 21, 2011.
- ^ Oeste, Franz Dietrich; de Richter, Renaud; Ming, Tingzhen; Caillol, Sylvain (January 13, 2017). "Climate engineering by mimicking natural dust climate control: the iron salt aerosol method". Earth System Dynamics. 8 (1): 1–54. Bibcode:2017ESD.....8....1O. doi:10.5194/esd-8-1-2017 – via esd.copernicus.org.
- ^ Krasnopolsky, V. A.; Parshev, V. A. (1981). "Chemical composition of the atmosphere of Venus". Nature. 292 (5824): 610–613. Bibcode:1981Natur.292..610K. doi:10.1038/292610a0. S2CID 4369293.
- ^ Krasnopolsky, Vladimir A. (2006). "Chemical composition of Venus atmosphere and clouds: Some unsolved problems". Planetary and Space Science. 54 (13–14): 1352–1359. Bibcode:2006P&SS...54.1352K. doi:10.1016/j.pss.2006.04.019.
للاستزادة
- Lide DR, ed. (1990). CRC Handbook of Chemistry and Physics (71st ed.). Ann Arbor, Michigan, US: CRC Press. ISBN 9780849304712.
- Stecher PG, Finkel MJ, Siegmund OH, eds. (1960). The Merck Index of Chemicals and Drugs (7th ed.). Rahway, New Jersey, US: Merck & Co.
- Nicholls D (1974). Complexes and First-Row Transition Elements, Macmillan Press, London, 1973. A Macmillan chemistry text. London: Macmillan Press. ISBN 9780333170885.
- Wells AF (1984). Structural Inorganic Chemistry. Oxford science publications (5th ed.). Oxford, UK: Oxford University Press. ISBN 9780198553700.
- Reich HJ, Rigby HJ, eds. (1999). Acidic and Basic Reagents. Handbook of Reagents for Organic Synthesis. New York: John Wiley & Sons, Inc. ISBN 9780471979258.
- CS1 الألمانية-language sources (de)
- CS1 errors: periodical ignored
- Short description is different from Wikidata
- ECHA InfoCard ID from Wikidata
- Articles containing unverified chemical infoboxes
- كلوريدات
- Iron(III) compounds
- هاليدات فلزية
- Coordination complexes
- Deliquescent substances
- Dehydrating agents
- Acid catalysts