سادس فلوريد الكبريت

(تم التحويل من سداسي فلوريد الكبريت)
سادس فلوريد الكبريت
Skeletal formula of sulfur hexafluoride with assorted dimensions
Spacefill model of sulfur hexafluoride
Ball and stick model of sulfur hexafluoride
الأسماء
اسم أيوپاك
Sulfur hexafluoride
اسم أيوپاك النظامي
Hexafluoro-λ6-sulfane[1]
أسماء أخرى
Elagas

Esaflon
Sulfur(VI) fluoride

Sulfuric fluoride
المُعرِّفات
رقم CAS
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.018.050 Edit this at Wikidata
رقم EC
  • 219-854-2
مرجع Gmelin 2752
KEGG
عناوين مواضيع طبية MeSH {{{value}}}
رقم RTECS
  • WS4900000
UNII
UN number 1080
الخصائص
الصيغة الجزيئية SF6
كتلة مولية 146.06 g/mol
المظهر Colorless gas
الرائحة odorless[2]
الكثافة 6.17 g/L
نقطة الانصهار
نقطة الغليان
قابلية الذوبان في الماء 0.003% (25 °C)[2]
قابلية الذوبان slightly soluble in water, very soluble in ethanol, hexane, benzene
ضغط البخار 2.9 MPa (at 21.1 °C)
القابلية المغناطيسية −44.0·10−6 cm3/mol
البنية
البنية البلورية Orthorhombic, oP28
الزمرة الفراغية Oh
هندسة
إحداثية
Orthogonal hexagonal
الشكل الجزيئي Octahedral
Dipole moment 0 D
الكيمياء الحرارية
الإنتالپية المعيارية
للتشكل
ΔfHo298
−1209 kJ·mol−1[3]
Standard molar
entropy
So298
292 J·mol−1·K−1[3]
علم الأدوية
V08DA05 (WHO)
بيانات الترخيص
المخاطر
صفحة بيانات السلامة External MSDS
تحذيرات وقائية S38
NFPA 704 (معيـَّن النار)
حدود التعرض الصحية بالولايات المتحدة (NIOSH):
PEL (المسموح)
TWA 1000 ppm (6000 mg/m3)[2]
REL (الموصى به)
TWA 1000 ppm (6000 mg/m3)[2]
IDLH (خطر عاجل)
N.D.[2]
مركبات ذا علاقة
sulfur fluorides ذات العلاقة
Disulfur decafluoride

Sulfur tetrafluoride

مركـّبات ذات علاقة
Selenium hexafluoride

Sulfuryl fluoride
Tellurium hexafluoride

ما لم يُذكر غير ذلك، البيانات المعطاة للمواد في حالاتهم العيارية (عند 25 °س [77 °ف]، 100 kPa).
X mark.svgN verify (what is YesYX mark.svgN ?)
مراجع الجدول

Sulfur hexafluoride (SF6) is an inorganic, colorless, odorless, non-flammable, non-toxic extremely potent greenhouse gas, and an excellent electrical insulator.[4] SF 6 has an octahedral geometry, consisting of six fluorine atoms attached to a central sulfur atom. It is a hypervalent molecule. Typical for a nonpolar gas, it is poorly soluble in water but quite soluble in nonpolar organic solvents. It is generally transported as a liquefied compressed gas. It has a density of 6.12 g/L at sea level conditions, considerably higher than the density of air (1.225 g/L).

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

التخليق والتفاعلات

SF 6 can be prepared from the elements through exposure of S 8 to F 2. This was also the method used by the discoverers Henri Moissan and Paul Lebeau in 1901. Some other sulfur fluorides are cogenerated, but these are removed by heating the mixture to disproportionate any S 2F 10 (which is highly toxic) and then scrubbing the product with NaOH to destroy remaining SF 4.

Alternatively, utilizing bromine, sulfur hexafluoride can be synthesized from SF4 and CoF3 at lower temperatures (e.g. 100 °C), as follows:[5]

2CoF3 + SF4 + (Br2) → SF6 + 2CoF2 + (Br2)

There is virtually no reaction chemistry for SF 6. A main contribution to the inertness of SF6 is the steric hindrance of the sulfur atom, whereas its heavier group 16 counterparts, such as SeF6 are more reactive than SF6 as a result of less steric hindrance (See hydrolysis example).[6] It does not react with molten sodium below its boiling point,[7] but reacts exothermically with lithium.


Applications

More than 10,000 tons of SF 6 are produced per year, most of which (over 8,000 tons) is used as a gaseous dielectric medium in the electrical industry.[8] Other main uses include an inert gas for the casting of magnesium, and as an inert filling for insulated glazing windows.

Dielectric medium

SF 6 is used in the electrical industry as a gaseous dielectric medium for high-voltage circuit breakers, switchgear, and other electrical equipment, often replacing oil filled circuit breakers (OCBs) that can contain harmful PCBs. SF 6 gas under pressure is used as an insulator in gas insulated switchgear (GIS) because it has a much higher dielectric strength than air or dry nitrogen. The high dielectric strength is a result of the gas's high electronegativity and density. This property makes it possible to significantly reduce the size of electrical gear. This makes GIS more suitable for certain purposes such as indoor placement, as opposed to air-insulated electrical gear, which takes up considerably more room. Gas-insulated electrical gear is also more resistant to the effects of pollution and climate, as well as being more reliable in long-term operation because of its controlled operating environment. Exposure to an arc chemically breaks down SF 6 though most of the decomposition products tend to quickly re-form SF 6, a process termed "self-healing".[9] Arcing or corona can produce disulfur decafluoride (S 2F 10), a highly toxic gas, with toxicity similar to phosgene. S 2F 10 was considered a potential chemical warfare agent in World War II because it does not produce lacrimation or skin irritation, thus providing little warning of exposure.

SF 6 is also commonly encountered as a high voltage dielectric in the high voltage supplies of particle accelerators, such as Van de Graaff generators and Pelletrons and high voltage transmission electron microscopes.

Alternatives include fluoroketone.[10][11]

Medical use

SF 6 is used to provide a tamponade or plug of a retinal hole in retinal detachment repair operations[12] in the form of a gas bubble. It is inert in the vitreous chamber[13] and initially doubles its volume in 36 hours before being absorbed in the blood in 10–14 days.[14]

SF 6 is used as a contrast agent for ultrasound imaging. Sulfur hexafluoride microbubbles are administered in solution through injection into a peripheral vein. These microbubbles enhance the visibility of blood vessels to ultrasound. This application has been used to examine the vascularity of tumours.[15] It remains visible in the blood for 3 to 8 minutes, and is expired by the lungs.[16]

Tracer compound

Sulfur hexafluoride was the tracer gas used in the first roadway air dispersion model calibration; this research program was sponsored by the U.S. Environmental Protection Agency and conducted in Sunnyvale, California on U.S. Highway 101.[17] Gaseous SF 6 is used as a tracer gas in short-term experiments of ventilation efficiency in buildings and indoor enclosures, and for determining infiltration rates. Two major factors recommend its use: its concentration can be measured with satisfactory accuracy at very low concentrations, and the Earth's atmosphere has a negligible concentration of SF 6.

Sulfur hexafluoride was used as a non-toxic test gas in an experiment at St. John's Wood tube station in London, United Kingdom on 25 March 2007.[18] The gas was released throughout the station, and monitored as it drifted around. The purpose of the experiment, which had been announced earlier in March by the Secretary of State for Transport Douglas Alexander, was to investigate how toxic gas might spread throughout London Underground stations and buildings during a terrorist attack.

Sulfur hexafluoride is also routinely used as a tracer gas in laboratory fume hood containment testing. The gas is used in the final stage of ASHRAE 110 fume hood qualification. A plume of gas is generated inside of the fume hood and a battery of tests are performed while a gas analyzer arranged outside of the hood samples for SF6 to verify the containment properties of the fume hood.

It has been used successfully as a tracer in oceanography to study diapycnal mixing and air-sea gas exchange.

Other uses

  • The United States Navy's Mark 50 torpedo closed Rankine-cycle propulsion system is powered by sulfur hexafluoride in an exothermic reaction with solid lithium.[19]
  • SF 6 plasma is also used in the semiconductor industry as an etchant. SF 6 breaks down in the plasma into sulfur and fluorine, the fluorine plasma performing the etching.[20]
  • The magnesium industry uses large amounts of SF 6 as inert gas to fill casting forms.[21]
  • Pressurizes waveguides in high-power microwave systems. The gas insulates the waveguide, preventing internal arcing.
  • Has been used in electrostatic loudspeakers because of its high dielectric strength and high molecular weight.[22]
  • Was used to fill Nike Air bags in all of their shoes from 1992-2006.[23]
  • Feedstock for production of the chemical weapon disulfur decafluoride.
  • For entertainment purposes, when breathed, SF 6 causes the voice to become significantly deeper, due to its density being so much higher than air, as seen in this video, here. This is related to the more well-known effect of breathing low-density helium, which causes someone's voice to become much higher. Both of these effects should only be attempted with caution as these gases displace oxygen that the lungs are attempting to extract from the air. Sulfur hexafluoride is also mildly anesthetic.[24]
  • For science demonstrations / magic as "invisible water" since a light foil boat can be floated in a tank, as will an air filled balloon

Greenhouse gas

Mauna Loa sulfur hexafluoride timeseries.

According to the Intergovernmental Panel on Climate Change, SF 6 is the most potent greenhouse gas that it has evaluated, with a global warming potential of 23,900[25] times that of CO 2 when compared over a 100-year period. Measurements of SF6 show that its global average mixing ratio has increased by about 0.2 ppt (parts per trillion) per year to over 9 ppt as of February 2018.[26][27] Sulfur hexafluoride is also extremely long-lived, is inert in the troposphere and stratosphere and has an estimated atmospheric lifetime of 800–3200 years.[28] SF 6 is very stable (for countries reporting their emissions to the UNFCCC, a GWP of 23,900 for SF 6 was suggested at the third Conference of the Parties: GWP used in Kyoto protocol).[29] Average global SF6 concentrations increased by about seven percent per year during the 1980s and 1990s, mostly as the result of its use in the magnesium production industry, and by electrical utilities and electronics manufacturers. Given the small amounts of SF6 released compared to carbon dioxide, its overall contribution to global warming is estimated to be less than 0.2 percent.[30]

In Europe, SF 6 falls under the F-Gas directive which ban or control its use for several applications. Since 1 January 2006, SF 6 is banned as a tracer gas and in all applications except high-voltage switchgear.[31] It was reported in 2013 that a three-year effort by the United States Department of Energy to identify and fix leaks at its laboratories in the United States such as the Princeton Plasma Physics Laboratory, where the gas is used as a high voltage insulator, had been productive, cutting annual leaks by 35,000 pounds. This was done by comparing purchases with inventory, assuming the difference was leaked, then locating and fixing the leaks.[4]


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

التأثيرات والاحتياطات الفسيولوجية

مثل الزينون، فإن سادس فلوريد الكبريت هو غاز غير سام، إلا أنه بإزاحته الأكسجين في الرئتين، فإنه يحمل خطر الاختناق إذا اِستُنشِق الكثير منه.[32] Being more dense than air, if a substantial quantity of gas is released it will settle in low-lying areas and present a significant risk of asphyxiation if the area is entered. This is particularly relevant to its use as an insulator in electrical equipment where workers may be in trenches or pits below equipment containing SF 6.[33]

As with all gases, the density of SF 6 affects the resonance frequencies of the vocal tract, thus changing drastically the vocal sound qualities, or timbre, of those who inhale it. It does not affect the vibrations of the vocal folds. The density of sulfur hexafluoride is relatively high at room temperature and pressure due to the gas's large molar mass. Unlike helium, which has a molar mass of about 4 grams/mol and gives the voice a childish and a "chipmunk like" quality, SF 6 has a molar mass of about 146 g/mol, and the speed of sound through the gas is about 134 m/s at room temperature, giving the voice a "demonic" quality when SF 6 is inhaled.[34][35] For comparison, the molar mass of air, which is about 80% nitrogen and 20% oxygen, is approximately 30 g/mol which leads to a speed of sound of 343 m/s.[36]

Sulfur hexafluoride has an anesthetic potency slightly lower than nitrous oxide.[37]

خصائص أخرى

  • Thermal conductivity at STP (101.3 kPa and 0 °C) = 12.058 mW/(m·K)[38]
  • Heat capacity at constant pressure (Cp) (101.3 kPa and 21 °C) = 0.097 kJ/(mol·K)
  • Critical temperature: 45.5 °C
  • Critical pressure: 37.59 bar (3.759 MPa 37.1 atm)[38]

انظر أيضاً

References

  1. ^ "Sulfur Hexafluoride - PubChem Public Chemical Database". The PubChem Project. National Center for Biotechnology Information. Archived from the original on 3 November 2012. Retrieved 22 February 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  2. ^ أ ب ت ث ج NIOSH Pocket Guide to Chemical Hazards 0576
  3. ^ أ ب Zumdahl, Steven S. (2009). Chemical Principles 6th Ed. Houghton Mifflin Company. p. A23. ISBN 978-0-618-94690-7.
  4. ^ أ ب Michael Wines (June 13, 2013). "Department of Energy's Crusade Against Leaks of a Potent Greenhouse Gas Yields Results". The New York Times. Archived from the original on June 14, 2013. Retrieved June 14, 2013. {{cite news}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  5. ^ Winter R.W., Pugh J.R. and Cook P.W. (Jan. 9-14, 2011). “SF5Cl, SF4 and SF6: Their Bromine−facilitated Production & a New Preparation Method for SF5Br”. 20th Winter Fluorine Conference.
  6. ^ Duward Shriver; Peter Atkins (2010). Inorganic Chemistry. W. H. Freeman. p. 409. ISBN 978-1429252553.
  7. ^ Raj, Gurdeep (2010). Advanced Inorganic Chemistry: Volume II (12th ed.). GOEL Publishing House. p. 160. Extract of page 160
  8. ^ Constantine T. Dervos; Panayota Vassilou (2012). Sulfur Hexafluoride: Global Environmental Effects and Toxic Byproduct Formation. Taylor and Francis.
  9. ^ Jakob, Fredi; Perjanik, Nicholas. "Sulfur Hexafluoride, A Unique Dielectric" (PDF). Analytical ChemTech International, Inc. Archived from the original (PDF) on 2016-03-04. {{cite journal}}: Cite journal requires |journal= (help); Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  10. ^ "Archived copy" (PDF). Archived from the original (PDF) on 2017-10-12. Retrieved 2017-10-12. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)CS1 maint: archived copy as title (link)
  11. ^ Kieffel, Yannick; Biquez, Francois (1 June 2015). "SF<inf>6</inf> alternative development for high voltage switchgears". SF6 alternative development for high voltage switchgears. pp. 379–383. doi:10.1109/ICACACT.2014.7223577. ISBN 978-1-4799-7352-1. Archived from the original on 27 September 2017. Retrieved 12 October 2017 – via IEEE Xplore. {{cite book}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  12. ^ Daniel A. Brinton; C. P. Wilkinson (2009). Retinal detachment: principles and practice. Oxford University Press. p. 183. ISBN 978-0199716210.
  13. ^ Gholam A. Peyman, M.D., Stephen A. Meffert, M.D., Mandi D. Conway (2007). Vitreoretinal Surgical Techniques. Informa Healthcare. p. 157. ISBN 978-1841846262.{{cite book}}: CS1 maint: multiple names: authors list (link)
  14. ^ Hilton, G. F.; Das, T.; Majji, A. B.; Jalali, S. (1996). "Pneumatic retinopexy: Principles and practice". Indian Journal of Ophthalmology. 44 (3): 131–143. PMID 9018990.
  15. ^ Lassau N, Chami L, Benatsou B, Peronneau P, Roche A (December 2007). "Dynamic contrast-enhanced ultrasonography (DCE-US) with quantification of tumor perfusion: a new diagnostic tool to evaluate the early effects of antiangiogenic treatment". Eur Radiol. 17 (Suppl 6): F89–98. doi:10.1007/s10406-007-0233-6. PMID 18376462.
  16. ^ "SonoVue, INN-sulphur hexafluoride - Annex I - Summary of Product Characteristics" (PDF). European Medicines Agency. Retrieved 2019-02-24.
  17. ^ C Michael Hogan (September 10, 2011). "Air pollution line source". Encyclopedia of Earth. Archived from the original on 29 May 2013. Retrieved 22 February 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  18. ^ "'Poison gas' test on Underground". BBC News. 25 March 2007. Archived from the original on 15 February 2008. Retrieved 22 February 2013. {{cite news}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  19. ^ Hughes, T.G.; Smith, R.B.; Kiely, D.H. (1983). "Stored Chemical Energy Propulsion System for Underwater Applications". Journal of Energy. 7 (2): 128–133. doi:10.2514/3.62644. {{cite journal}}: Unknown parameter |lastauthoramp= ignored (|name-list-style= suggested) (help)
  20. ^ Y. Tzeng; T.H. Lin (September 1987). "Dry Etching of Silicon Materials in SF 6 Based Plasmas" (PDF). Journal of the Electrochemical Society. Archived from the original (PDF) on 6 April 2012. Retrieved 22 February 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help); Unknown parameter |lastauthoramp= ignored (|name-list-style= suggested) (help)
  21. ^ Scott C. Bartos (February 2002). "Update on EPA's manesium industry partnership for climate protection" (PDF). US Environmental Protection Agency. Archived from the original (PDF) on October 10, 2012. Retrieved December 14, 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  22. ^ Dick Olsher (October 26, 2009). "Advances in loudspeaker technology - A 50 year prospective". The Absolute Sound. Archived from the original on December 14, 2013. Retrieved December 14, 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  23. ^ Stanley Holmes (September 24, 2006). "Nike Goes For The Green". Bloomberg Business Week Magazine. Archived from the original on June 3, 2013. Retrieved December 14, 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  24. ^ Edmond I Eger MD; et al. (September 10, 1968). "Anesthetic Potencies of Sulfur Hexafluoride, Carbon Tetrafluoride, Chloroform and Ethrane in Dogs: Correlation with the Hydrate and Lipid Theories of Anesthetic Action". Anesthesiology - The Journal of the American Society of Anesthesiologists, Inc.
  25. ^ "2.10.2 Direct Global Warming Potentials". Intergovernmental Panel on Climate Change. 2007. Archived from the original on 2 March 2013. Retrieved 22 February 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  26. ^ "Chromatograph for Atmospheric Trace Species SF6 Mixing Ratio". US National Oceanic and Atmospheric Administration. Archived from the original on 18 January 2012. Retrieved 22 February 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  27. ^ ftp://aftp.cmdl.noaa.gov/data/hats/sf6/insituGCs/CATS/monthly/smo_SF6_MM.dat. Retrieved 11 April 2018. {{cite web}}: Missing or empty |title= (help)
  28. ^ A. R. Ravishankara, S. Solomon, A. A. Turnipseed, R. F. Warren; Solomon; Turnipseed; Warren (8 January 1993). "Atmospheric Lifetimes of Long-Lived Halogenated Species". Science. 259 (5092): 194–199. Bibcode:1993Sci...259..194R. doi:10.1126/science.259.5092.194. PMID 17790983. Archived from the original on 24 September 2015. Retrieved 22 February 2013. {{cite journal}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)CS1 maint: multiple names: authors list (link)
  29. ^ "6.12.2 Direct GWPs". Intergovernmental Panel on Climate Change. 2001. Archived from the original on 20 July 2016. Retrieved 22 February 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  30. ^ "SF6 Sulfur Hexafluoride". PowerPlantCCS Blog. 19 March 2011. Archived from the original on 30 December 2012. Retrieved 22 February 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  31. ^ "Climate: MEPs give F-gas bill a 'green boost'". EurActiv.com. 13 October 2005. Archived from the original on 3 June 2013. Retrieved 22 February 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  32. ^ "Sulfur Hexafluoride". Hazardous Substances Data Bank. U.S. National Library of Medicine. Archived from the original on 9 May 2018. Retrieved 26 March 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  33. ^ "Guide to the safe use of SF6 in gas". UNIPEDE/EURELECTRIC. Archived from the original on 2013-10-04. Retrieved 2013-09-30. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  34. ^ "Thermophysical Properties of Fluid Systems". NIST. Archived from the original on 15 January 2014. Retrieved 10 January 2014. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  35. ^ "Have You Ever Wanted to Sound Like a Demon? Here's How". Science Explorer. Archived from the original on 8 September 2016. Retrieved 9 September 2016. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  36. ^ "Physics in Speech". University of New South Wales. Archived from the original on 21 February 2013. Retrieved 22 February 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  37. ^ Adriani, John (1962). The Chemistry and Physics of Anesthesia. Second Edition. Illinois: Thomas Books. p. 319. ISBN 9780398000110.
  38. ^ أ ب "Sulfur hexafluoride". Air Liquide Gas Encyclopedia. Archived from the original on 31 March 2012. Retrieved 22 February 2013. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)

Further reading

وصلات خارجية

قالب:Hexafluorides