ثلاثي أكسيد الأنتيمون

(تم التحويل من Antimony trioxide)
Antimony(III) oxide
Antimony(III) oxide
الأسماء
اسم أيوپاك
Antimony(III) oxide
أسماء أخرى
Antimony sesquioxide
Antimonous oxide
Flowers of Antimony
المُعرِّفات
رقم CAS
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.013.796 Edit this at Wikidata
رقم EC
  • 215-474-6
KEGG
رقم RTECS
  • CC5650000
UNII
الخصائص
الصيغة الجزيئية Sb2O3
كتلة مولية 291.518 g/mol
المظهر white solid
الرائحة odorless
الكثافة 5.2 g/cm3, α-form
5.67 g/cm3 β-form
نقطة الانصهار
نقطة الغليان
قابلية الذوبان في الماء 370±37 μg/L between 20.8 °C and 22.9 °C
قابلية الذوبان soluble in acid
القابلية المغناطيسية −69.4×10−6 cm3/mol
معامل الانكسار (nD) 2.087, α-form
2.35, β-form
البنية
البنية البلورية cubic (α) < 570 °C
orthorhombic (β) > 570 °C
هندسة
إحداثية 		pyramidal
Dipole moment zero
المخاطر
ن.م.ع. مخطط تصويري رمز الخطر على الصحة في النظام المنسق عالمياً لتصنيف وعنونة الكيماويات (GHS)[1]
ن.م.ع. كلمة الاشارة Warning[1]
H351[1]
P281[1]
NFPA 704 (معيـَّن النار)
Flammability code 0: لن يشتعل. مثل الماءHealth code 2: التعرض الشديد أو المتواصل ولكن ليس بمزمن قد يتسبب في عجز مؤقت أو جرح بُحتمل بقاؤه. مثل الكلوروفورمReactivity code 0: مستقر في العادة، حتى تحت ظروف التعرض للنار، ولا يتفاعل مع الماء. مثل النيتروجين السائلSpecial hazards (white): no codeNFPA 704 four-colored diamond
0
2
0
الجرعة أو التركيز القاتل (LD, LC):
7000 mg/kg, oral (rat)
حدود التعرض الصحية بالولايات المتحدة (NIOSH):
PEL (المسموح)
 TWA 0.5 mg/m3 (as Sb)[2]
REL (الموصى به)
 TWA 0.5 mg/m3 (as Sb)[2]
مركبات ذا علاقة
Antimony trisulfide
Antimony triselenide
Antimony telluride
Dinitrogen trioxide
Phosphorus trioxide
Arsenic trioxide
Bismuth trioxide
مركـّبات ذات علاقة
 Diantimony tetraoxide
Antimony pentoxide
ما لم يُذكر غير ذلك، البيانات المعطاة للمواد في حالاتهم العيارية (عند 25 °س [77 °ف]، 100 kPa).
YesY verify (what is YesYX mark.svgN ?)
مراجع الجدول

Antimony(III) oxide is the inorganic compound with the formula Sb2O3. It is the most important commercial compound of antimony. It is found in nature as the minerals valentinite and senarmontite.[3] Like most polymeric oxides, Sb2O3 dissolves in aqueous solutions with hydrolysis. A mixed arsenic-antimony oxide occurs in nature as the very rare mineral stibioclaudetite.[4][5]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Production and properties

Global production of antimony(III) oxide in 2012 was 130,000 tonnes, an increase from 112,600 tonnes in 2002. China produces the largest share followed by US/Mexico, Europe, Japan and South Africa and other countries (2%).[6]

As of 2010, antimony(III) oxide was produced at four sites in the EU. It is produced via two routes, re-volatilizing of crude antimony(III) oxide and by oxidation of antimony metal. Oxidation of antimony metal dominates in Europe. Several processes for the production of crude antimony(III) oxide or metallic antimony from virgin material. The choice of process depends on the composition of the ore and other factors. Typical steps include mining, crushing and grinding of ore, sometimes followed by froth flotation and separation of the metal using pyrometallurgical processes (smelting or roasting) or in a few cases (e.g. when the ore is rich in precious metals) by hydrometallurgical processes. These steps do not take place in the EU but closer to the mining location.


Re-volatilizing of crude antimony(III) oxide

Step 1) Crude stibnite is oxidized to crude antimony(III) oxide using furnaces operating at approximately 500 to 1,000 °C. The reaction is the following:

2 Sb2S3 + 9 O2 → 2 Sb2O3 + 6 SO2

Step 2) The crude antimony(III) oxide is purified by sublimation.

Oxidation of antimony metal

Antimony metal is oxidized to antimony(III) oxide in furnaces. The reaction is exothermic. Antimony(III) oxide is formed through sublimation and recovered in bag filters. The size of the formed particles is controlled by process conditions in furnace and gas flow. The reaction can be schematically described by:

4 Sb + 3 O2 → 2 Sb2O3

Properties

Antimony(III) oxide is an amphoteric oxide. It dissolves in aqueous sodium hydroxide solution to give the meta-antimonite NaSbO2, which can be isolated as the trihydrate. Antimony(III) oxide also dissolves in concentrated mineral acids to give the corresponding salts, which hydrolyzes upon dilution with water.[7] With nitric acid, the trioxide is oxidized to antimony(V) oxide.[8]

When heated with carbon, the oxide is reduced to antimony metal. With other reducing agents such as sodium borohydride or lithium aluminium hydride, the unstable and very toxic gas stibine is produced.[9] When heated with potassium bitartrate, a complex salt potassium antimony tartrate, KSb(OH)2·C4H2O6, is formed.[8]

Structure

The structure of Sb2O3 depends on the temperature of the sample. Dimeric Sb4O6 is the high temperature (1560 °C) gas.[10] Sb4O6 molecules are bicyclic cages, similar to the related oxide of phosphorus(III), phosphorus trioxide.[11] The cage structure is retained in a solid that crystallizes in a cubic habit. The Sb–O distance is 197.7 pm and the O–Sb–O angle of 95.6°.[12] This form exists in nature as the mineral senarmontite.[11] Above 606 °C, the more stable form is orthorhombic, consisting of pairs of -Sb-O-Sb-O- chains that are linked by oxide bridges between the Sb centers. This form exists in nature as the mineral valentinite.[11]

Sb4O6-molecule-from-senarmontite-xtal-2004-3D-balls-B.png Antimony(III)-oxide-senarmontite-xtal-2004-3D-balls.png Antimony(III)-oxide-valentinite-xtal-2004-3D-balls.png
Sb4O6 senarmontite valentinite

Uses

The annual consumption of antimony(III) oxide in the United States and Europe is approximately 10,000 and 25,000 tonnes, respectively. The main application is as flame retardant synergist in combination with halogenated materials. The combination of the halides and the antimony is key to the flame-retardant action for polymers, helping to form less flammable chars. Such flame retardants are found in electrical apparatuses, textiles, leather, and coatings.[13]

Other applications:

Safety

Antimony(III) oxide has suspected carcinogenic potential for humans.[13] Its TLV is 0.5 mg/m3, as for most antimony compounds.[14] Before 2021, no other human health hazards were identified for antimony(III) oxide, and no risks to human health and the environment were identified from the production and use of antimony trioxide in daily life. However, the 15th Report on Carcinogens released on December 21, 2021, by the US Department of Health and Human Services categorised antimony(III) oxide as carcinogenic.[15]

References

  1. ^ أ ب ت ث قالب:GESTIS
  2. ^ أ ب NIOSH Pocket Guide to Chemical Hazards 0036
  3. ^ Greenwood, N. N.; & Earnshaw, A. (1997). Chemistry of the Elements (2nd Edn.), Oxford:Butterworth-Heinemann. ISBN 0-7506-3365-4.
  4. ^ "Stibioclaudetite".
  5. ^ "List of Minerals". 21 March 2011.
  6. ^ European Union Risk Assessment Report: DIANTIMONY TRIOXIDE (draft). Sweden. November 2008. CAS No: 1309-64-4; EINECS No: 215-175-0. Archived from the original. You must specify the date the archive was made using the |archivedate= parameter. http://esis.jrc.ec.europa.eu/doc/risk_assessment/REPORT/datreport415.pdf. 
  7. ^ Housecroft, C. E.; Sharpe, A. G. (2008). "Chapter 15: The group 15 elements". Inorganic Chemistry (3rd ed.). Pearson. p. 481. ISBN 978-0-13-175553-6.
  8. ^ أ ب Patnaik, P. (2002). Handbook of Inorganic Chemicals. McGraw-Hill. p. 56. ISBN 0-07-049439-8.
  9. ^ Bellama, J. M.; MacDiarmid, A. G. (1968). "Synthesis of the Hydrides of Germanium, Phosphorus, Arsenic, and Antimony by the Solid-Phase Reaction of the Corresponding Oxide with Lithium Aluminum Hydride". Inorganic Chemistry. 7 (10): 2070–2072. doi:10.1021/ic50068a024.
  10. ^ Wiberg, E.; Holleman, A. F. (2001). Inorganic Chemistry. Elsevier. ISBN 0-12-352651-5.
  11. ^ أ ب ت Wells, A. F. (1984). Structural Inorganic Chemistry. Oxford: Clarendon Press. ISBN 0-19-855370-6.
  12. ^ Svensson, C. (1975). "Refinement of the crystal structure of cubic antimony(III) oxide, Sb2O3". Acta Crystallographica B. 31 (8): 2016–2018. doi:10.1107/S0567740875006759.
  13. ^ أ ب Grund, S. C.; Hanusch, K.; Breunig, H. J.; Wolf, H. U. "Antimony and Antimony Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a03_055.pub2. {{cite encyclopedia}}: Cite has empty unknown parameter: |authors= (help)
  14. ^ Newton, P. E.; Schroeder, R. E.; Zwick, L.; Serex, T. (2004). "Inhalation Developmental Toxicity Studies In Rats With Antimony(III) oxide (Sb2O3)". Toxicologist. 78 (1–S): 38.
  15. ^ "15th Report on Carcinogens". National Toxicology Program (in الإنجليزية). Retrieved 2023-06-15.

Further reading

  • Institut national de recherche et de sécurité (INRS), Fiche toxicologique nº 198 : Trioxyde de diantimoine, 1992.
  • The Oxide Handbook, G.V. Samsonov, 1981, 2nd ed. IFI/Plenum, ISBN 0-306-65177-7

External links

تمّ الاسترجاع من "https://www.marefa.org/w/index.php?title=ثلاثي_أكسيد_الأنتيمون&oldid=4027511"