سيانيد النحاس الأحادي

(تم التحويل من Copper(I) cyanide)
سيانيد النحاس الأحادي
Alpha-CuCN-unit-cell-CM-3D-balls.png
Copper(I) cyanide A.jpg
الأسماء
اسم أيوپاك
Copper(I) cyanide
أسماء أخرى
Cuprous cyanide, copper cyanide, cupricin
المُعرِّفات
رقم CAS
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.008.076 Edit this at Wikidata
رقم EC
  • 208-883-6
رقم RTECS
  • GL7150000
UNII
UN number 1587
الخصائص
الصيغة الجزيئية CuCN
كتلة مولية 89.563 g/mol
المظهر off-white / pale yellow powder
الكثافة 2.92 g/cm3[2]
نقطة الانصهار
قابلية الذوبان في الماء negligible
نتاج قابلية الذوبان، Ksp 3.47×10−20[1]
قابلية الذوبان insoluble in ethanol, cold dilute acids;
soluble in NH3, KCN
البنية
البنية البلورية monoclinic
المخاطر
صفحة بيانات السلامة Oxford MSDS
ن.م.ع. مخطط تصويري الرمز التصويري للجمجمة والعظمتين المتصالبتين في Globally Harmonized System of Classification and Labelling of Chemicals (GHS)رمز البيئة في النظام المنسق عالمياً لتصنيف وعنونة الكيماويات (GHS)
ن.م.ع. كلمة الاشارة Danger
H300, H310, H330, H410
P260, P262, P264, P270, P271, P273, P280, P284, P301+P310, P302+P350, P304+P340, P310, P320, P321, P322, P330, P361, P363, P391, P403+P233, P405, P501
NFPA 704 (معيـَّن النار)
Flammability code 0: لن يشتعل. مثل الماءHealth code 4: التعرض لفترة قصيرة جداً قد يتسبب في الموت أو جروح بالغة باقية. مثل غاز VXReactivity code 0: مستقر في العادة، حتى تحت ظروف التعرض للنار، ولا يتفاعل مع الماء. مثل النيتروجين السائلSpecial hazards (white): no codeNFPA 704 four-colored diamond
0
4
0
نقطة الوميض Non-flammable
حدود التعرض الصحية بالولايات المتحدة (NIOSH):
PEL (المسموح)
 TWA 1 mg/m3 (as Cu)[3]
REL (الموصى به)
 TWA 1 mg/m3 (as Cu)[3]
IDLH (خطر عاجل)
 TWA 100 mg/m3 (as Cu)[3]
ما لم يُذكر غير ذلك، البيانات المعطاة للمواد في حالاتهم العيارية (عند 25 °س [77 °ف]، 100 kPa).
YesY verify (what is YesYX mark.svgN ?)
مراجع الجدول

Copper(I) cyanide (cuprous cyanide) is an inorganic compound with the formula CuCN. This off-white solid occurs in two polymorphs; impure samples can be green due to the presence of Cu(II) impurities. The compound is useful as a catalyst, in electroplating copper, and as a reagent in the preparation of nitriles.[4]

Structure

Copper cyanide is a coordination polymer. It exists in two polymorphs both of which contain -[Cu-CN]- chains made from linear copper(I) centres linked by cyanide bridges. In the high-temperature polymorph, HT-CuCN, which is isostructural with AgCN, the linear chains pack on a hexagonal lattice and adjacent chains are off set by +/- 1/3 c, Figure 1.[5] In the low-temperature polymorph, LT-CuCN, the chains deviate from linearity and pack into rippled layers which pack in an AB fashion with chains in adjacent layers rotated by 49 °, Figure 2.[6]

  • Figure 1: The structure of HT-CuCN showing the chains running along the c axis. Key: copper = orange and cyan = head-to-tail disordered cyanide groups.

    Figure 1: The structure of HT-CuCN showing the chains running along the c axis. Key: copper = orange and cyan = head-to-tail disordered cyanide groups.

  • Figure 2: The structure of LT-CuCN showing sheets of chains stacking in an ABAB fashion. Key: copper = orange and cyan = head-to-tail disordered cyanide groups.

    Figure 2: The structure of LT-CuCN showing sheets of chains stacking in an ABAB fashion. Key: copper = orange and cyan = head-to-tail disordered cyanide groups.

LT-CuCN can be converted to HT-CuCN by heating to 563 K in an inert atmosphere. In both polymorphs the copper to carbon and copper to nitrogen bond lengths are ~1.85 Å and bridging cyanide groups show head-to-tail disorder.[7]


Preparation

Cuprous cyanide is commercially available and is supplied as the low-temperature polymorph. It can be prepared by the reduction of copper(II) sulfate with sodium bisulfite at 60 °C, followed by the addition of sodium cyanide to precipitate pure LT-CuCN as a pale yellow powder.[8]

2 CuSO4 + NaHSO3 + H2O + 2 NaCN → 2 CuCN + 3 NaHSO4

On addition of sodium bisulfite the copper sulfate solution turns from blue to green, at which point the sodium cyanide is added. The reaction is performed under mildly acidic conditions. Copper cyanide has historically been prepared by treating copper(II) sulfate with sodium cyanide, in this redox reaction, copper(I) cyanide forms together with cyanogen:[9]

2 CuSO4 + 4 NaCN → 2 CuCN + (CN)2 + 2 Na2SO4

Because this synthetic route produces cyanogen, uses two equivalents of sodium cyanide per equivalent of CuCN made and the resulting copper cyanide is impure it is not the industrial production method. The similarity of this reaction to that between copper sulfate and sodium iodide to form copper(I) iodide is one example of cyanide ions acting as a pseudohalide. It also explains why cupric cyanide (copper(II) cyanide, Cu(CN)2), has not been synthesised.

Reactions

Copper cyanide is insoluble in water but rapidly dissolves in solutions containing CN− to form [Cu(CN)3]2− and [Cu(CN)4]3−, which exhibit trigonal planar and tetrahedral coordination geometry, respectively. These complexes contrast with those of silver and gold cyanides, which form [M(CN)2]− ions in solution.[10] The coordination polymer KCu(CN)2 contains [Cu(CN)2]− units, which link together forming helical anionic chains.[11]

Copper cyanide is also soluble in concentrated aqueous ammonia, pyridine and N-methylpyrrolidone.

Applications

Cuprous cyanide is used for electroplating copper.[4]

Organic synthesis

CuCN is a prominent reagent in organocopper chemistry. It reacts with organolithium reagents to form "mixed cuprates" with the formulas Li[RCuCN] and Li2[R2CuCN]. The use of CuCN revolutionized the deployment of simpler organocopper reagents of the type CuR and LiCuR2, the so-called Gilman reagents. In the presence of cyanide, these mixed cuprates are more readily purified and more stable.

The mixed cuprates Li[RCuCN] and Li2[R2CuCN] function as sources of the carbanions R−, but with diminished reactivity compared to the parent organolithium reagent. Thus they are useful for conjugate additions and some displacement reactions.

CuCN also forms silyl and stannyl reagents, which are used as sources of R3Si− and R3Sn−.[12]

CuCN is used in the conversion of aryl halides to nitriles in the Rosenmund–von Braun reaction.[13]

CuCN has also been introduced as a mild electrophilic source of nitrile under oxidative conditions, for instance secondary amines[14] as well as sulfides and disulfides[15] have been efficiently cyanated using this methodology. This last methodology has been then introduced in a domino 3 component reaction, leading to 2-aminobenthiazoles.[16]

References

  1. ^ John Rumble (June 18, 2018). CRC Handbook of Chemistry and Physics (in English) (99 ed.). CRC Press. pp. 5–188. ISBN 978-1138561632.{{cite book}}: CS1 maint: unrecognized language (link)
  2. ^ قالب:RubberBible87th
  3. ^ أ ب ت NIOSH Pocket Guide to Chemical Hazards 0150
  4. ^ أ ب H. Wayne Richardson "Copper Compounds" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005. DOI:10.1002/14356007.a07_567
  5. ^ S. J. Hibble; S. M. Cheyne; A. C. Hannon; S. G. Eversfield (2002). "CuCN: A Polymorphic Matirial. Structure of One Form from Total Neutron Diffraction". Inorg. Chem. 41 (20): 8040–8048. doi:10.1021/ic0257569. PMID 12354028.
  6. ^ S. J. Hibble; S. G. Eversfield; A. R. Cowley; A. M. Chippindale (2004). "Copper(I) Cyanide: A Simple Compound with a complicated Structure and Surprising Room-Temperature Reactivity". Angew. Chem. Int. Ed. 43 (5): 628–630. doi:10.1002/anie.200352844. PMID 14743423.
  7. ^ S. Kroeker; R. E. Wasylishen; J. V. Hanna (1999). "The Structure of Solid Copper(I) Cyanide: A Multinuclear Magnetic and Quadrupole Resonance Study". Journal of the American Chemical Society. 121 (7): 1582–1590. doi:10.1021/ja983253p.
  8. ^ H. J. Barber (1943). "Cuprous Cyanide: A Note on its Preparation and Use". J. Chem. Soc.: 79. doi:10.1039/JR9430000079.
  9. ^ قالب:OrgSynth
  10. ^ Sharpe, A. G. (1976). The Chemistry of Cyano Complexes of the Transition Metals. Academic Press. p. 265. ISBN 0-12-638450-9.
  11. ^ Housecroft, Catherine E.; Sharpe, Alan G. (2008) Inorganic Chemistry (3rd ed.), Pearson: Prentice Hall. ISBN 978-0-13-175553-6.
  12. ^ Dieter, R. K. In Modern Organocopper Chemistry; Krause, N., Ed.; Wiley-VCH: Mörlenback, Germany, 2002; Chapter 3.
  13. ^ Steven H. Bertz, Edward H. Fairchild, Karl Dieter, "Copper(I) Cyanide" in Encyclopedia of Reagents for Organic Synthesis 2005, John Wiley & Sons. DOI:10.1002/047084289X.rc224.pub2
  14. ^ Teng, Fan; Yu, Jin-Tao; Jiang, Yan; Yang, Haitao; Cheng, Jiang (2014). "A copper-mediated oxidative N-cyanation reaction". Chemical Communications (in الإنجليزية). 50 (61): 8412–8415. doi:10.1039/c4cc03439b. ISSN 1364-548X. PMID 24948488.
  15. ^ Castanheiro, Thomas; Gulea, Mihaela; Donnard, Morgan; Suffert, Jean (2014). "Practical Access to Aromatic Thiocyanates by CuCN-Mediated Direct Aerobic Oxidative Cyanation of Thiophenols and Diaryl Disulfides". European Journal of Organic Chemistry (in الإنجليزية). 2014 (35): 7814–7817. doi:10.1002/ejoc.201403279. ISSN 1099-0690. S2CID 98786803.
  16. ^ Castanheiro, Thomas; Suffert, Jean; Gulea, Mihaela; Donnard, Morgan (2016). "Aerobic Copper-Mediated Domino Three-Component Approach to 2-Aminobenzothiazole Derivatives". Organic Letters. 18 (11): 2588–2591. doi:10.1021/acs.orglett.6b00967. ISSN 1523-7060. PMID 27192105.

External links

خطأ لوا في وحدة:Authority_control على السطر 278: attempt to call field '_showMessage' (a nil value).

تمّ الاسترجاع من "https://www.marefa.org/w/index.php?title=سيانيد_النحاس_الأحادي&oldid=4082279"