قالب:Convert/doc

Template {{convert}} calculates measurements from one unit (you can enter) to another one, and then presents the results. For example:

{{convert|2|km|mi}} → 2 kilometres (1.2 mi)

{{convert|7|mi|km}} → 7 miles (11 km)

The available units are listed below. Units are case-sensitive always (kW, not KW and not kw). Multiple formatting and calculation options are listed below.

See also Help:Convert for more complete information

 Unit name or symbol (abbreviation): 1 pound or 1 lb?

By default, the first value shows unit name, the second the symbols (= abbreviation). Use |abbr=on/off to change this behaviour:

{{convert|1|lb|kg}} → 1 pound (0.45 kg) (To compare; default: first value shows unit name)

{{convert|1|lb|kg|abbr=on}} → 1 lb (0.45 kg)

{{convert|1|lb|kg|abbr=off}} → 1 pound (0.45 kilograms)

• |abbr=in toggles the default behaviour (|abbr=out):

{{convert|1|lb|kg|abbr=in}} → 1 lb (0.45 kilograms)

 Adjective: a 10-mile distance

Use |adj=on to produce the adjective form. The difference:

{{convert|10|mi|km}} to go → 10 miles (16 km) to go. (To compare, default)

A {{convert|10|mi|km|adj=on}} distance → A 10-mile (16 km) distance. (Adjective form)

 Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?

By definition, 100 ft equals 30,480 mm. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

 Default rounding

By default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is more precise. An exception to this is rounding temperatures (see below).

Examples of rounding
Input	Displays as	Note
{{convert|123|ft|m|-1}}	123 feet (40 m)
{{convert|123|ft|m|0}}	123 feet (37 m)
{{convert|123|ft|m|1}}	123 feet (37.5 m)
{{convert|550|ft|m|0}}	550 feet (168 m)	Approximate value is 167.64 m
{{convert|550|ft|m}}	550 feet (170 m)	Rounds to 170, when approximate value is 167.64 m
{{convert|500|ft|m|0}}	500 feet (152 m)	Approximate value is 152.4 m
{{convert|500|ft|m}}	500 feet (150 m)	Rounds to 150, when approximate value is 152.4 m

Convert supports four types of rounding:

 Round to a given precision: use |precision=

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest power of ¹⁄₁₀ this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.

 Round to a given number of significant figures: use |sigfig=

To specify the output number to be with n significant figures use |sigfig=<number>:

• To compare: {{convert|1200|ft|m}} → 1,200 feet (370 m)
• {{convert|1200|ft|m|sigfig=4}} → 1,200 feet (365.8 m)
• {{convert|1200|ft|m|sigfig=3}} → 1,200 feet (366 m)
• {{convert|1200|ft|m|sigfig=2}} → 1,200 feet (370 m)
• {{convert|1200|ft|m|sigfig=1}} → 1,200 feet (400 m)

Setting |sigfig= is meaningless

• {{convert|1200|ft|m|sigfig=0}} → 1,200 feet (370 m)

 Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

{{convert|10|m|ft}} → 10 metres (33 ft)

{{convert|10|m|ft|round=5}} → 10 metres (35 ft)

Similar: using |round=25 rounds the outcome to a multiple of 25.

{{convert|10|m|ft}} → 10 metres (33 ft)

{{convert|10|m|ft|round=25}} → 10 metres (25 ft)

To compare: {{convert|10|m|ft|sigfig=4}} → 10 metres (32.81 ft)

In a range, one can round each value individually to the default. Use |round=each:

{{convert|10 x 200 x 3000|m|ft}} → 10 by 200 by 3,000 metres (33 ft × 656 ft × 9,843 ft)

{{convert|10 x 200 x 3000|m|ft|round=each}} → 10 by 200 by 3,000 metres (33 ft × 660 ft × 9,800 ft)

 Round to a multiple of a given fraction: 2+³⁄₁₆ inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in ¹⁄₃).

{{convert|5.56|cm|in|frac=16}} → 5.56 centimetres (2+3⁄16 in)

{{convert|8|cm|in|frac=4}} → 8 centimetres (3+1⁄4 in)

The fraction is reduced when possible:

{{convert|8|cm|in|frac=100}} → 8 centimetres (3+3⁄20 in)

{{convert|8|cm|in}} → 8 centimetres (3.150 in) (To compare)

 Rounding the temperatures °C, °F and K

In temperatures, the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

{{convert|10|C|F K}} → 10 °C (50 °F; 283 K)

Note

For a temperature difference, like to convert "A rise of 10 °C", use |C-change=10 &tc.

{{convert|10|C-change|F-change K-change}} → A rise of 10 °C (18 °F; 10 K)

 Into multiple units: 10 °C (50 °F; 283 K)

Separate the multiple output units by a space:

{{convert|10|C|F K}} → 10 °C (50 °F; 283 K)

{{convert|5|km|mi nmi}} → 5 kilometres (3.1 mi; 2.7 nmi)

See also

For multiple-unit options like 1 ft 5 in, see #In input and #In output.

 Ranges of values

 A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:

Range separators in {{convert}}
Separator	Convert	Result	Notes
-	{{convert|3|-|6|ft}}	3–6 feet (0.91–1.83 m)	Input can be hyphen (-) or en dash (–), output uses en dash
– – (en dash)	{{convert|3|–|6|ft}}	3–6 feet (0.91–1.83 m)
and	{{convert|3|and|6|ft}}	3 and 6 feet (0.91 and 1.83 m)
&	{{convert|3|&|6|ft}}	3 &	Same as and
and(-)	{{convert|3|and(-)|6|ft}}	3 and 6 feet (0.91–1.83 m)	|abbr=on abbreviates the first unit
and(-)|abbr=on	{{convert|3|and(-)|6|ft|abbr=on}}	3 and 6 ft (0.91–1.83 m)
or	{{convert|3|or|6|ft}}	3 or 6 feet (0.91 or 1.83 m)
to	{{convert|3|to|6|ft}}	3 to 6 feet (0.91 to 1.83 m)
to(-)	{{convert|3|to(-)|6|ft}}	3 to 6 feet (0.91–1.83 m)	|abbr=on abbreviates the first unit
to(-)|abbr=on	{{convert|3|to(-)|6|ft|abbr=on}}	3 to 6 ft (0.91–1.83 m)
to about	{{convert|3|to about|6|ft}}	3 to about 6 feet (0.91 to about 1.83 m)
+/-	{{convert|3|+/-|6|ft}}	3 ± 6 feet (0.91 ± 1.83 m)
± ±	{{convert|3|±|6|ft}}	3 ± 6 feet (0.91 ± 1.83 m)
+	{{convert|3|+|6|ft}}	3 + 6 feet (0.91 + 1.83 m)
,	{{convert|3|,|6|ft}}	3, 6 feet (0.91, 1.83 m)
, and	{{convert|3|, and|6|ft}}	3, and 6 feet (0.91, and 1.83 m)
, or	{{convert|3|, or|6|ft}}	3, or 6 feet (0.91, or 1.83 m)
by	{{convert|3|by|6|ft}}	3 by 6 feet (0.91 by 1.83 m)
x	{{convert|3|x|6|ft}}	3 by 6 feet (0.91 m × 1.83 m)	Scientific notation. |abbr=on abbreviates the first unit
× ×	{{convert|3|×|6|ft}}	3 by 6 feet (0.91 m × 1.83 m)
x|abbr=on	{{convert|3|x|6|ft|abbr=on}}	3 ft × 6 ft (0.91 m × 1.83 m)
xx	|xx| is deprecated. Use |x| instead
*	|*| is deprecated. Use |x| instead
to-	|to-| is deprecated. Use |to(-)| instead
&	|&| is deprecated. Use |and| instead
abbr=mos	|abbr=mos is deprecated. Use |x| or |by| instead

 Multiple dimensions: 6 m × 12 m (20 ft × 39 ft)

Use "by"

{{convert|6|by|12|ft|m}} → 6 by 12 feet (1.8 by 3.7 m)

Use "×" or ""x""

{{convert|6|x|12|m|ft}} → 6 by 12 metres (20 ft × 39 ft)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km²):

{{convert|6|x|12|m|ft|abbr=on}} → 6 m × 12 m (20 ft × 39 ft)

 About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

• {{convert|1|ft|3|in|mm}} → 1 foot 3 inches (380 mm) (to compare)
• {{convert|1|ft|3|in|x|3|ft|5|in|mm}} → 1 foot 3 inches ()

 Words

 Spelling of unit name: UK metre or US meter?

Default spelling of units is en-UK. To show en-US spelling, use |sp=us:

{{convert|1|m|ft}} → 1 metre (3.3 ft) -- default

{{convert|1|m|ft|sp=us}} → 1 meter (3.3 ft)

 Spell out numbers: ten miles

To write a number in words, use |spell=in:

{{convert|10|mi|m|spell=in}} → ten miles (16,000 m)

To spell out both in and out values, use |spell=on:

{{convert|10|mi|m|spell=on}} → ten miles (sixteen thousand metres)

To make first letter a capital, use |spell=In, |spell=On

{{convert|10|mi|m|spell=In}} → Ten miles (16,000 m)

{{convert|10|mi|m|spell=On}} → Ten miles (sixteen thousand metres)

Remember that the spelling of the units (ft, m) is independently set by |abbr=. To the extreme:

{{convert|10|mi|m|spell=on|abbr=off|sp=us}} → ten miles (sixteen thousand meters)

 Extra words: 4 planted acres

Incomplete section

{{convert|4|acre||adj=pre|planted}} → 4 planted acres (1.6 ha)

 Extra adjective words: A 10-foot-long corridor

{{convert|4|ft|m|adj=mid|-long}} → 10-foot-long (3.0 m)

 Plurals: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

• {{convert|1|metre}} → 1 metre (3 ft 3 in)
• {{convert|2|metre}} → 2 metres (6 ft 7 in)
• {{convert|2|metre|abbr=on}} → 2 m (6 ft 7 in)

Exception

Entering the unit spelled |foot| forces singular output "foot", whatever the number is.

• {{convert|100|foot|abbr=off}} → 100 foot (30 metres)

 Changes to grammatical structure: The 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons

This example is from the article Fort McHenry:

The American defenders had 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons.

You can't get this sentence structure (and some others you might want to use) as a direct result of using {{convert}} and its options. However, you can get the correctly converted numbers and the grammatical structure you want to use by using {{convert}} plus three stages of editing, previewing and saving versions of the text you wish to change.

Stage 1: Enter the input numbers and units in {{convert}} as usual (this stage is just to get the calculated output):

• had {{convert|18 |, |24 |, |32 |lb |kg |0 }} cannons

Get the converted data below by clicking Show Preview (or Save Page):

→ had 18, 24, 32 pounds (8, 11, 15 kg) cannons

Stage 2: Change the resulting text from a {{convert|...}} template result to plain code by adding subst: to the template name (short for "substitution") :

• had {{subst:convert|18 |, |24 |, |32 |lb |kg |0 }} cannons

Double-check this by clicking Show Preview. The preview will show the converted numbers are still correct:

→ had 18, 24, 32 pounds (8, 11, 15 kg) cannons

Then click Save Page.

Stage 3: Click Edit at the top of the article again, and then go to the text in the editing window. You'll see that the text is there in plain code. The template {{convert|...}} itself will have disappeared. You can change the text as needed. The substituted text and plain code in the editing window in this example would be:

had 18, 24, 32 pounds (8, 11, 15 kg) cannons

You can edit this text as usual to add the grammatical features you wish. In this example, editing the above text to:

• had 18-,_24-_and_32-pounder (8, 11_and_15 kg) cannons

And then saving your edit will show the following result in the article text:

→ "had 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons"

 Numbers

 Using an SI prefix: gigameter (Gm), or micrometer (μm)

السوابق المترية
النص الرمز المعامل yotta Y 1024 zetta Z 1021 exa E 1018 peta P 1015 tera T 1012 giga G 109 mega M 106 kilo k 103 hecto h 102 deca da 101 (none) (none)  1 deci d 10−1 centi c 10−2 milli m 10−3 micro μ 10−6 nano n 10−9 pico p 10−12 femto f 10−15 atto a 10−18 zepto z 10−21 yocto y 10−24

Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigameter. These are plain multiplication factors.

To illustrate, these are trivial calculations (from meter to meter), showing the multiplication factor:

• 12 Gm (1.2×10¹⁰ m)
• 12 μm (1.2×10⁻⁵ m)

The prefix can be added before the SI unit (here: unit m for meter):

• {{convert|12|Gm|mi|abbr=on}} → 12 Gm (7,500,000 mi)
• Mm: 12 Mm (7,500 mi)
• km: 12 km (39,000 ft)
• mm: 12 mm (0.47 in)
• μm: 12 μm (0.012 mm)
• um: 12 μm (0.012 mm) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

• {{convert|12000|mi|Mm|abbr=on}} → 12,000 mi (19 Mm)
• {{convert|12|in|μm|abbr=on}} → 12 in (300,000 μm)

As an exception, the non-SI unit "inch" can have the "μ" prefix too)

• {{convert|12|μm|μin|abbr=on}} → 12 μm (470 μin)

للمزيد من المعلومات: Help:Convert units § SI prefixes

 Engineering notation: 7 × 10⁶ m

 In the unit: e6m

Engineering number notations like 7E6 (for 7 × 10⁶) can be entered as a "prefix" to the unit:

{{convert|7|e6m}} → 7 million metres (23,000,000 ft)

The same is possible for the output unit:

{{convert|23,000,000|ft|e6m}} → 23,000,000 feet (7.0×10^⁶ m)

Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:

e3 (thousand), e6 (million), e9 (billion), e12 (trillion), e15 (quadrillion).

 Scientific notation: 1.23×10⁻¹⁴

In scientific notation, a number is written like 1٫23×10⁻¹⁴.

With {{convert}}, the input can be in e-notation such as 12.3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

• {{convert|12.3e-15|atm|atm|abbr=on}} → 12.3×10⁻¹⁵ atm (1.23×10⁻¹⁴ atm)
• {{convert|0.00000005|atm|atm|abbr=on}} → 0.00000005 atm (5.0×10⁻⁸ atm)

 Input with fractions: 1+1⁄2 inches (38.1 mm)

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

{{convert|1/2|in|mm|1}} → 1⁄2 inch (12.7 mm)

{{convert|1⁄2|in|mm|1}} → 1⁄2 inch (12.7 mm)

With integers, use a + sign

{{convert|2+1⁄2|in|mm|1}} → 2+1⁄2 inches (63.5 mm)

When negative, use a hyphen - and repeat it:

{{convert|-2-1⁄2|in|mm|1}} → −2+1⁄2 inches (−63.5 mm)

{{convert|2-1⁄2|in|mm|1}} → 2–1⁄2 inch (50.8–12.7 mm) Note: this is read as a range

{{convert|-2+1⁄2|in|mm|1}} → N Should be a number, not an expression (do not require a calculation)

 Output with horizontal fraction bar in: 1/2 inch

Using a double slash (//) returns a horizontal bar fraction:

• {{convert|1//2|in|mm|1}} → 1/2 inch (12.7 mm)
• {{convert|2+1//2|in|mm|1}} → 2+1/2 inches (63.5 mm)

 Thousands separator: 1,000 mi and 1000 mi

In input, a comma for thousands separator is accepted. A gap (space) is not. In output, by default, the thousand separator is the comma:

• {{convert|1,234,567|m|ft}} → 1,234,567 metres (4,050,417 ft)
• {{convert|1,234,567|m|ft}} → 1,234,567 metres (4,050,417 ft)
• {{convert|1 234 567|m|ft}} → N

Set |comma=off to remove the separator:

• {{convert|1234567|m|ft|comma=off}} → 1,234,567 metres (4,050,417 ft)

Use |comma=gaps to set digit grouping by gap (<space>) in larger numbers (thousands separator):

• {{convert|1234567|m|ft}} → 1,234,567 metres (4,050,417 ft) (To compare, default)
• {{convert|1234567|m|ft|comma=gaps}} → 1234567 metres (4050417 ft)

Setting |comma=5 or |comma=gaps5 will only add the separator when the number of digits is 5 or more:

• {{convert|1234|m|ft}} → 1,234 metres (4,049 ft) (To compare, default)
• {{convert|1234|m|ft|comma=5}} → 1234 metres (4049 ft)
• {{convert|1234567|m|ft|comma=5}} → 1,234,567 metres (4,050,417 ft)
• {{convert|1234|m|ft|comma=gaps5}} → 1,234 metres (4,049 ft)
• {{convert|1234567|m|ft|comma=gaps5}} → 1,234,567 metres (4,050,417 ft)

 Output manipulation

 Brackets and separators: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, or, br, x|...:

{{convert|10|m|ft}} → 10 metres (33 ft) -- ( ) brackets are the default

{{convert|10|m|ft|disp=sqbr}} → 10 metres [33 ft]

{{convert|10|m|ft|disp=comma}} → 10 metres, 33 ft

{{convert|10|m|ft|disp=or}} → 10 metres or 33 feet

Setting |disp=br will force a new line (<br>)

{{convert|10|m|ft|disp=br}} → 10 metres
33 feet

Also |disp=br() will force a new line, and keep the brackets:

{{convert|10|m|ft|disp=br()}} → 10 metres
(33 feet)

Setting |disp=x|... allows any text as separator:

{{convert|10|m|ft|disp=x|_MyText_}} → 10 metres_MyText_33 ft -- (To display spaces, use  )

 Flipping (reordering) the two measurements: 1,609.3 metres (1 mile)

Setting |order=flip will flip (swap) the two measurements:

{{convert|1|mi|m}} → 1 mile (1,609.3 metres) (To compare, default)

{{convert|1|mi|m|order=flip}} → 1,609.3 metres (1 mile)

When converting to multiple units, the effect is:

{{convert|10|km|mi nmi|order=flip}} → 6.2137 miles; 5.3996 nautical miles (10 kilometres)

{{convert|10|km|nmi mi|order=flip}} → 5.3996 nautical miles; 6.2137 miles (10 kilometres)

 Displaying parts of the result: 2 (1.5)

It is possible to display only parts of the conversion result:

Convert	Output	Description
{{convert|2|cuyd|m3}}	2 cubic yards (1.5 m3)	Default, to compare
{{convert|2|cuyd|m3|abbr=values}}	2 (1.5)	Input and output numbers
{{convert|2|cuyd|m3|disp=unit}}	cubic yards	Input unit
{{convert|2|cuyd|m3|disp=unit|adj=on}}	cubic-yard	Input unit, adjective (hyphenated)
{{convert|2|cuyd|cuyd|0|disp=out|abbr=off}}	2 cubic yards	Input (workaround)
{{convert|2|cuyd|m3|abbr=~}}	2 cubic yards [cu yd] (1.5 m3)	Input: both name and symbol
{{convert|2|cuyd|m3|disp=unit2}}	m3	Output unit (symbol)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}}	cubic metres	Output unit (name)
{{convert|2|cuyd|m3|disp=number}}	1.5	Output value
{{convert|2|cuyd|m3|disp=out}}	1.5 m3	Output value and unit
{{convert|2|cuyd|m3|disp=out|abbr=off}}	1.5 cubic metres	Output value and unit

 Display input name and symbol: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

{{convert|2|kPa|psi|abbr=~}} → 2 kilopascals [kPa] (0.29 psi)

A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure → A 2-kilopascal [kPa] (0.29 psi) pressure

 Table options

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

 Enforced line break

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

|disp=br	|disp=br()
100 kilometres 62 miles	100 kilometres (62 miles)

 Table columns showing numbers only

Using {convert} in a table cell, with |disp=table splits the result over two columns:

{{convert|10|m|ft|disp=table}} → style="text-align:right;"|10

|style="text-align:right;"|33

|disp=tablecen does the same, and also centers the text:

{{convert|20|m|ft|disp=tablecen}} → style="text-align:center;"|20

|style="text-align:center;"|66

The units are added as a column header:

	m	ft
|disp=table	10	33
|disp=tablecen	20	66
|disp=<other> (default)	30 metres (98 ft)

 Sorting

Use both |disp=table |sortable=on to produce table columns (pipe symbols), with sortable table column.

{{convert|10|m|ft|disp=table|sortable=on}} →

style="text-align:right;" data-sort-value="7001100000000000000"|10 |style="text-align:right;" data-sort-value="7001100000000000000"|33

	m	ft
A	15+3⁄4	52
B	15.5	51
C	16.0	52.5
D	16	52

Technical background

See Help:Sorting

The option adds the hidden numerical sortkey.

<span style="display:none">7001100000000000000</span>10

 Units

Units are case-sensitive: kW, not KW or kw

القائمة المختصرة للوحدات التي يتعامل معها {{Convert}}
الـشـرح
النظام	الوحدة	كود (بديل)	الاختصار	ملاحظات	معامل التحويل	توافيق
the system(s) to which the unit belongs	units listed by name	codes that can be entered when using the template	abbreviations as displayed by the template	notes which may pertain to the units in general or specifically to their use in this template	conversion factors used by the template to convert to and from the SI base unit	codes for multiple conversions
Length (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/m	combinations
SI	مـِگامترre	Mm	Mm	US spelling: megameter	1٬000٬000
	كيلومتر	km	كم	US spelling: kilometer	1٬000	km mi
	metre	m	m	US spelling: meter	1	m ft m ftin
	centimetre	cm	cm	US spelling: centimeter	0٫01	cm in
	ميليمتر	mm	مم	US spelling: millimeter	0٫001	mm in
	micrometre	μm (um)	µm	US spelling: micrometer	0٫000001
	nanometre	nm	nm	US spelling: nanometer	0٫000000001
non-SI metric	ångström	Å (angstrom)	Å		0٫0000000001
Imperial & US customary	ميل	mi	ميل		1٬609٫344	mi km
	furlong	furlong			201٫168
	chain	chain			20٫1168
	rod	rd	rd	For other names of this unit see the full list.	5٫0292
	قامة	fathom		assumes 1 fathom ≡ 6 ft	1٫8288
	yard	yd	yd	assumes the international definition	0٫9144
	foot	ft (foot)	ft	The foot code will produce foot as the plural form.	0٫3048	ft m (foot m)
	inch	in	in		0٫0254	in cm in mm
Other	nautical mile	nmi	nmi	the international standard nautical mile For other nautical miles see the full list.	1٬852
	فرسخ فلكي	pc	pc		30٫856775813057000×1015
	سنة ضوئية	ly	ly		9٫460730472580800×1015
	وحدة فلكية	AU	AU		149٬597٬870٬700
المساحة (Full list)
النظام	الوحدة	الكود (بديل)	الاختصار	هامش	معامل التغيير/م²	توافيق
SI	square kilometre	sqkm	km²	US spelling: square kilometer	1٬000٬000	sqkm sqmi
	square metre	sqm	m²	US spelling: square meter	1	sqm sqft
	square centimetre	sqcm	cm²	US spelling: square centimeter	0٫0001	sqcm sqin
	square millimetre	sqmm	mm²	US spelling: square millimeter	0٫000001	sqmm sqin
non-SI metric	هكتار	ha	هك		10٬000
Imperial & US customary	ميل مربع	sqmi	ميل²		2٬589٬988٫110336	sqmi sqkm
	فدان	acre	acres		4٬046٫856422
	square yard	sqyd	sq yd		0٫83612736
	قدم مربع	sqft (sqfoot)	sq ft	The sqfoot code will produce square foot as the plural form.	0٫09290304	sqft sqm (sqfoot sqm)
	square inch	sqin	sq in		0٫00064516	sqin sqcm
Other	square nautical mile	sqnmi	sq nmi		3٬429٬904
	دونم	dunam		For alternative spellings and definitions see the full list	1٬000
	tsubo	tsubo	坪		(400/121)
Volume (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/m³	combinations
SI	cubic metre	cum	m³	US spelling: cubic meter one kilolitre	1
	cubic centimetre	cucm	cm³	US spelling: cubic centimeter one millilitre	0٫000001
		cc	cc
	cubic millimetre	cumm	mm³	US spelling: cubic millimeter	0٫000000001
non-SI metric	kilolitre	kl	kl	US spelling: kiloliter one cubic metre	1
		kL	kL
	litre	l	l	US spelling: liter one cubic decimetre Triple combinations are also possible. See the full list.	0٫001	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
		L	L			L impgal L USgal L U.S.gal L USdrygal L U.S.drygal
	centilitre	cl	cl	US spelling: centiliter	0٫00001
		cL	cL
	millilitre	ml	ml	US spelling: milliliter one cubic centimetre	0٫000001	ml impoz ml USoz ml U.S.oz
		mL	mL			mL impoz mL USoz mL U.S.oz
Imperial & US customary	ياردة مكعبة	cuyd	cu yd		0٫764554857984
	قدم مكعب	cuft (cufoot)	ق3	The cufoot code will produce cubic foot as the plural form.	0٫028316846592
	cubic inch	cuin	cu in		0٫000016387064
Imperial	barrel	impbbl	imp bbl	36 imp gal	0٫16365924
	bushel	impbsh	imp bsh	8 imp gal	0٫03636872
		impbu	imp bu
	gallon	impgal	imp gal	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Triple combinations are also possible. See the full list.	0٫00454609	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	quart	impqt	imp qt	1/4 imp gal or 40 imp fl oz	0٫0011365225
	pint	imppt	imp pt	1/8 imp gal or 20 imp fl oz	0٫00056826125
	imperial fluid ounce	impoz (impfloz)	imp fl oz	1/160 imp gal	0٫0000284130625	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	barrel	USbbl	US bbl	31½ US gal used for liquids except for oil and beer (see the full list)	0٫119240471196
		U.S.bbl	U.S. bbl
	برميل	oilbbl	bbl	42 US gal	0٫158987294928
	beer barrel	USbeerbbl (usbeerbbl)	US bbl		0٫117347765304
		U.S.beerbbl (usbeerbbl)	U.S. bbl
	گالون أمريكي	USgal	گالون أمريكي	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Triple combinations are also possible. See the full list.	0٫003785411784	USgal l USgal L USgal impgal
		U.S.gal	U.S. gal			USgal l USgal L USgal impgal
	quart	USqt	US qt	1/4 US gal or 32 US fl oz	0٫000946352946
		U.S.qt	U.S. qt
	pint	USpt	US pt	1/8 US gal or 16 US fl oz	0٫000473176473
		U.S.pt	U.S. pt
	fluid ounce	USoz (USfloz)	US fl oz	1/128 US gal	0٫0000295735295625	USoz ml USoz mL USoz impoz
		U.S.oz (U.S.floz)	U.S. fl oz			U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	barrel	USdrybbl	US bbl	105/32 US bsh	0٫11562819898508
		U.S.drybbl	U.S. dry bbl
	bushel	USbsh	US bsh	2150.42 cubic inches by definition	0٫03523907016688
		USbu	U.S. bu
		U.S.bsh	U.S. bsh
		U.S.bu	U.S. bu
	dry gallon	USdrygal	US dry gal	1/8 US bsh Triple combinations are also possible. See the full list.	0٫00440488377086	USdrygal l USdrygal L USdrygal impgal
		U.S.drygal	U.S. dry gal			U.S.drygal l U.S.drygal L U.S.drygal impgal
	dry quart	USdryqt	US dry qt	1/32 US bsh	0٫001101220942715
		U.S.dryqt	U.S. dry qt
	dry pint	USdrypt	US dry pt	1/32 US bsh	0٫0005506104713575
		U.S.drypt	U.S. dry pt
Speed (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/(m/s)	combinations
SI	metre per second	m/s	m/s	US spelling: meter per second	1	m/s ft/s (m/s foot/s)
non-SI metric	كيلومتر/ساعة	km/h	كم/س		(5/18)	km/h mph
Imperial & US customary	ميل في الساعة	mph	ميل/س		0٫44704	mph km/h
	قدم/ثانية	ft/s (foot/s)	ft/s	The foot/s code will produce foot per second as the plural form.	0٫3048	ft/s m/s
Maritime units	عقدة	kn (knot)	عقدة		(4٫63/9)
Force (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/N	combinations
SI	گيگانيوتن	GN	GN	Triple combinations are also possible. See the full list.	1٬000٬000٬000	GN LT-f GN LTf GN L/T-f GN L/Tf GN ST-f GN STf GN S/T-f GN S/Tf
	مـِگانيوتن	MN	MN	Triple combinations are also possible. See the full list.	1٬000٬000	MN LT-f MN LTf MN L/T-f MN L/Tf MN ST-f MN STf MN S/T-f MN S/Tf
	kilonewton	kN	kN	Triple combinations are also possible. See the full list.	1٬000	kN LT-f kN LTf kN L/T-f kN L/Tf kN ST-f kN STf kN S/T-f kN S/Tf
	نيوتن	N	N		1	N lb-f N lbf N oz-f N ozf
	millinewton	mN	mN		0٫001	mN oz-f mN ozf mN gr-f mN grf
	micronewton	μN (uN)	µN		0٫000001	μN gr-f μN grf
	nanonewton	nN	nN		0٫000000001	nN gr-f nN grf
cgs	مـِگاداين	Mdyn	Mdyn		10
	kilodyne	kdyn	kdyn		0٫01
	داين	dyn (dyne)	dyn		0٫00001
	millidyne	mdyn	mdyn		0٫00000001
Metric gravitational units	tonne-force	t-f	tf		9٬806٫65
		tf	tf
	kilogram-force	kg-f	kgf		9٫80665
		kgf	kgf
	gram-force	g-f	gf		0٫00980665
		gf	gf
	milligram-force	mg-f	mgf		0٫00000980665
		mgf	mgf
Avoirdupois-based units	poundal	pdl	pdl		0٫138254954376
	long ton-force	LT-f	LTf		9٬964٫01641818352	LT-f ST-f LTf STf
		L/T-f	L/Tf			L/T-f S/T-f
		L/Tf	L/Tf			L/Tf S/Tf
		short ton-force	ST-f			STf		8٬896٫443230521	ST-f LT-f STf LTf
	S/T-f		S/Tf	S/T-f L/T-f
	S/Tf		S/Tf	S/Tf L/Tf
	pound-force		lb-f	lbf		4٫4482216152605
		lbf	lbf
	ounce-force	oz-f	ozf		0٫2780138203095378000
		ozf	ozf
	grain-force	gr-f	grf		0٫0006354602307515
		grf	grf
	Energy (Full list)
	system	unit	code (alternative)	abbreviation	notes	conversion factor/J	combinations
SI	gigajoule	GJ	GJ		1٬000٬000٬000
	مـِگاجول	MJ	MJ		1٬000٬000
	kilojoule	kJ	kJ		1٬000
	hectojoule	hJ	hJ		100
	decajoule	daJ	daJ		10
	جول	J	J		1
	decijoule	dJ	dJ		0٫1
	centijoule	cJ	cJ		0٫01
	millijoule	mJ	mJ		0٫001
	microjoule	μJ (uJ)	µJ		0٫000001
	nanojoule	nJ	nJ		0٫000000001
cgs	megaerg	Merg	Merg		0٫1
	kiloerg	kerg	kerg		0٫0001
	erg	erg	erg		0٫0000001
Watt-hour multiples	terawatt-hour	TWh	TWh		3٫600000000000000×1015
		TW.h	TW·h
	gigawatt-hour	GWh	GWh		3٫600000000000×1012
		GW.h	GW·h
	megawatt-hour	MWh	MWh		3٬600٬000٬000
		MW.h	MW·h
	kilowatt-hour	kWh	kWh		3٬600٬000
		kW.h	kW·h
	watt-hour	Wh	Wh		3٬600
		W.h	W·h
Electronvolt multiples	gigaelectronvolt	GeV	GeV		0٫0000000001602176487
	megaelectronvolt	MeV	MeV		قالب:Convert/list of units/facdisp-1
	kiloelectronvolt	keV	keV		قالب:Convert/list of units/facdisp-1
	electronvolt	eV	eV		قالب:Convert/list of units/facdisp-1
	millielectronvolt	meV	meV		قالب:Convert/list of units/facdisp-1
Calorie multiples	سعر حراري	Cal	Cal	The thermochemical calorie is the default definition. For other definitions see the full list.	4٬184
	megacalorie	Mcal	Mcal		4٬184٬000
	kilocalorie	kcal	kcal		4٬184
	calorie	cal	cal		4٫184
	millicalorie	mcal	mcal		0٫004184
pound/ounce-foot/ inch-hour-minute-second	foot-poundal	ftpdl	ft·pdl		0٫0421401100938048
	رطل-قدم	ftlbf	ft·lbf		1٫3558179483314003
		ftlb-f	ft·lbf
	inch-pound force	inlbf	in·lbf		0٫1129848290276167
		inlb-f	in·lbf
	inch-ounce force	inozf	in·ozf		0٫00706155181422604350
		inoz-f	in·ozf
	horsepower-hour	hph	hp·h		2٬684٬519٫537696173000
British thermal unit	British thermal unit	Btu	Btu	The International Steam Table British thermal unit is the default definition. For other definitions see the full list.	1٬055٫05585262
		BTU	BTU
TNT-based units	گيگاطن من تي إن تي	GtTNT			قالب:Scinote/6
	گيگاطن من تي إن تي	GtonTNT
	megatonne of TNT	MtTNT			4٫184000000000000×1015
	megaton of TNT	MtonTNT	Mt
	kilotonne of TNT	ktTNT			4٫184000000000×1012
	kiloton of TNT	ktonTNT
	tonne of TNT	tTNT			4٬184٬000٬000
	ton of TNT	tonTNT
Other	Hartree	Eh	Eh		قالب:Convert/list of units/facdisp-1
	rydberg	Ry	Ry		قالب:Convert/list of units/facdisp-1
	tonne of oil equivalent	toe	toe		41٬868٬000٬000
	برميل نفط مكافئ	BOE	BOE		6٬117٬863٬200
	cubic foot of natural gas	cuftnaturalgas (cufootnaturalgas)		The cufootnaturalgas code will produce cubic foot of natural gas as the plural form.	1٬055٬055٫85262
	litre-atmosphere	latm	l·atm		101٫325
		Latm	L·atm
	gallon-atmosphere	impgalatm	imp gal·atm		460٫63256925
	US gallon-atmosphere	USgalatm (usgalatm)	US gal·atm		383٫5568490138
		U.S.galatm (usgalatm)	U.S. gal·atm
Temperature (separate page; full list)
system	unit	code (alternative)	abbreviation	notes	conversion to kelvin	combinations
SI	kelvin	K	K	Triple combinations are also possible. See the full list.	[K]	K °C (K C) K °R (K R) K °F (K F)
	degree سلسيوس	°C (C)	°س		([°C]+273.15)	°C K (C K) °C °R (C R) °C °F (C F)
Imperial & US customary	degree Rankine	°R (R)	°R		([°R]/1.8)	°R K (R K) °R °C (R C) °R °F (R F)
	degree فارنهايت	°F (F)	°ف		(([°F]+459.67)/1.8)	°F K (F K) °F °C (F C) °F °R (F R)
Mass (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/kg	combinations
SI	kilogram	kg	kg	Triple combinations are also possible. See the full list.	1	kg lb kg st
	gram	g	g		0٫001	g oz
	milligram	mg	mg		0٫000001	mg gr
	microgram	μg (ug)	µg		0٫000000001
non-SI metric	tonne	t	t	Triple combinations are also possible. See the full list.	1٬000	t LT t ST t L/T t S/T
	طن متري	MT	t			MT LT MT ST
		M/T	M/T			M/T L/T M/T S/T
Avoirdupois	طن طويل	LT		2,240 lb used mostly in the British Commonwealth Triple combinations are also possible. See the full list.	1٬016٫0469088	LT t LT MT LT ST
		L/T	L/T			L/T t L/T M/T L/T S/T
	طن قصير	ST		2,000 lb used mostly in the US Triple combinations are also possible. See the full list.	907٫18474	ST t ST MT ST LT
		S/T	S/T			S/T t S/T M/T S/T L/T
	stone	st	st	14 lb used mostly in the British Commonwealth except Canada Triple combinations are also possible. See the full list.	6٫35029318	st kg st lb
	رطل	lb	lb	Triple combinations are also possible. See the full list.	0٫45359237	lb kg lb st
	أوقية	oz	أوقية		0٫028349523	oz g
	درامchm	drachm			0٫001771845195
	درامchm	dram
	grain	gr	gr	equivalent to the troy grain	0٫00006479891
Troy	troy ounce	ozt	ozt		0٫0311034768
other	carat	carat			0٫0002
Pressure
	unit	code	abbreviation		conversion factor/Pa
	مـِگاپاسكال	MPa	MPa		1٬000٬000	‎
	kilopascal	kPa	kPa		1٬000	‎
	hectopascal	hPa	hPa		100	‎
	پاسكال	Pa	Pa		1	‎
	millipascal	‎mPa‎	mPa		0٫001	‎
	millibar	mbar	mbar		100	‎
		mb	mb			‎
	دسيبار	‎dbar	dbar		10٬000	‎
	bar	bar	bar		100٬000	‎
	kilobarye	kBa	kBa		100	‎
	باري	‎Ba	Ba		0٫1	‎
	standard atmosphere	atm	atm		101٬325	‎
	تور	Torr	Torr		(20٬265/152)	‎
	millimetre of mercury	mmHg	mmHg		133٫322387415	‎
	inch of mercury	inHg	inHg		3٬386٫38864341	‎
	pound per square inch	psi	psi		(444٬822٬161٫52605/64٬516)	‎
Torque
	unit	code		notes
	newton metre	N·m (N.m)		Use N·m or N.m to get the mid-dot.
		Nm
Torque conversions can go to and from the following units. foot-poundal foot-pound force inch-pound force inch-ounce force Codes, abbreviations and conversion factors (but to N·m in this case) are the same as with the corresponding energy units as listed above.
Fuel efficency
	unit	code (alternative)		notes		combinations
	kilometres per litre	km/l (km/L)		Use km/L to get "km/L"		km/l mpgimp km/l mpgus
	litres per 100 kilometres	l/100 km (L/100 km)		Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
	litres per kilometre	l/km (L/km)		Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
	miles per imperial gallon	mpgimp				mpgimp mpgus
	miles per US gallon	mpgus (mpgUS, mpgU.S.)		Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
	imperial gallons per mile	impgal/mi				impgal/mi
	US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)		As above with the us vs US vs U.S.		usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
Power
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lower case hp for horsepower, for example)
Population density
	unit	code (alternative)		notes		combinations
	inhabitants per square kilometre	PD/sqkm		PD stands for population density, i.e. humans (inhabitants)		PD/sqkm PD/sqmi
	per square kilometre	/sqkm		Used when the word 'inhabitants' would be inappropriate.		/sqkm /sqmi
	inhabitants per hectare	PD/ha				PD/ha PD/acre
	per hectare	/ha				/ha /acre
	inhabitants per square mile	PD/sqmi		PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/sqkm
	per square mile	/sqmi		Used when the word 'inhabitants' would be inappropriate.		/sqmi /sqkm
	inhabitants per acre	PD/acre				PD/acre PD/ha
	per acre	/acre				/acre /ha

 Multiple units: 1 ft 5 in

 In input

Base document #Input multiples lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided, e.g. yd into ft):

• {{convert|1|yd|2|ft|3|in}} → 1 yard 2 feet 3 inches (1.60 m)
• {{convert|2|ft|3|in|cm}} → 2 feet 3 inches (69 cm)
• {{convert|1|lb|5|oz|g}} → 1 pound 5 ounces (600 g)

 In output

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at #Output multiples.

• {{convert|2|m|ftin}} → 2 metres (6 ft 7 in)
• {{convert|2|m|ft in}} → 2 metres (6.6 ft; 79 in) -- using a space, returns the decimal point
• {{convert|2|m}} → 2 metres (6 ft 7 in) -- the default

See also

• {{hands}} a length used to measure horses.

 'per' units: kg/hl

When using a slash (/), a unit like kg/hl is recognized as kilograms per hectolitre and will be converted with other mass/volume units.

• {{convert|1000|kg/hl}} → 1,000 kilograms per hectolitre (100 lb/imp gal)

 Currency per unit: $/mi, $/km

Using currency symbols in a $ per unit value, you can convert the per-unit:

• {{convert|10|$/mi|$/km}} → $10 per mile ($6.2/km) Y

You can set the unit in both values using |$=€:

• {{convert|10|$/mi|$/km|$=€}} → €10 per mile (€6.2/km)

You can not convert the currency. This outcome combination is not possible: $15 per mile (€8.6/km)

 Parameter list

Parameter options for {{convert}}
Parameter	Value	Description	Note
|abbr=in	in	Use symbol for first (left-hand side) unit	Unit display
|abbr=off	off	Use name for all units	Unit display
|abbr=none	none
|abbr=on	on	Use symbol for all units	Unit display
|abbr=out	out	Use symbol for right-hand side unit (default)	Unit display
|abbr=unit	unit	Use symbol for all units when using scientific notation	Unit display
|abbr=values	values	Omit both the input and output units: show only the numbers	Unit display
|abbr=~	~	Shows both unit name and symbol	Unit display
|adj=mid|…	mid	User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter.	Word adding, adjective
|adj=on	on	Unit name is adjective (singular and hyphenated)	Grammar, adjective
|adj=pre|…	pre	User-specified text before input unit. Expects 1 unnamed parameter.	Word adding
|adj=ri0	ri0	Round input with precision 0	Input precision
|adj=ri1	ri1	Round input with precision 1	Input precision
|adj=ri2	ri2	Round input with precision 2	Input precision
|adj=ri3	ri3	Round input with precision 3	Input precision
|comma=5	5	Only use comma for thousands separator if 5 or more digits	Number format
|comma=gaps	gaps	Use gaps (space), not comma, for thousands separator	Number format
|comma=off	off	No thousands separator	Number format
|disp=b	b	Join input and output using " (...)" (default)	Join values
|disp=sqbr	sqbr	Join input and output using " [...]"	Join values
|disp=br	br	Join input and output using "<br/>"	Join values
|disp=comma	comma	Join input and output using ", "	Join values
|disp=or	or	Join input and output using " or "	Join values
|disp=number	number	Display output number only	Parts only
|disp=output number only	output number only
|disp=out	out	Display only output number and name/symbol	Parts only
|disp=output only	output only
|disp=preunit|…[|…]	preunit	Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters.	Word adding
|disp=table	table	Output is suitable for a table cell with align="right"	Table columns
|disp=tablecen	tablecen	Output is suitable for a table cell with align="center"	Table columns
|disp=unit	unit	Display input name/symbol only (not input number, not output)	Parts only
|disp=unit2	unit2	Display output name/symbol only (not input; not output number)	Parts only
|disp=x|…	x	Join input and output using user-specified text	Word adding
|frac=N	N	Show imperial number in fractions, denominator=N	Number format, fraction
|input=P2048	P2048 (e.g.)	Reads and converts Wikidata property	Inside template
|lk=in	in	Link left-hand side unit name or symbol	Unit link
|lk=on	on	Link all unit names or symbols (but not twice for the same unit)	Unit link
|lk=out	out	Link right-hand side unit name or symbol	Unit link
|order=flip	flip	Inverts order of input, output measurements (conversion first)	Order
|order=out	out	Displays output units in the order entered, skipping input unit	Order
|qid=Q1056131	Q1056131 (e.g.)	Reads Wikidata property from Wikidata item	Inside template; testing
|qual=Q613628	Q613628 (e.g.)	Qualify Wikidata property
|round=5	5	Rounds calculation to the nearest multiple of 5	Output precision
|round=25	25	Rounds calculation to the nearest multiple of 25	Output precision
|round=each	each	In a range, each number is rounded by the default rounding	Output precision
|sigfig=N	N	Round output number to N significant figures (N is a positive integer)	Output precision
|sortable=on	on	Adds invisible sort key	Table sort
|sp=us	us	Use U.S. spelling ("meter" instead of default "metre")	Spelling U.S. names
|spell=in	in	Spell input number in words	Spelling numbers
|spell=In	In	Spell input number in words with first letter uppercase	Spelling numbers
|spell=on	on	Spell input and output numbers in words	Spelling numbers
|spell=On	On	Spell input and output numbers in words with first letter uppercase	Spelling numbers
|$=€	€	Replace $-sign with a currency sign, for example in $/acre (no currency conversion happens)	Cost per unit
|debug=yes	yes	Debugging only. In a sortable table: show the normally hidden sort key	Table sort
|disp=flip	flip	Deprecated. Use |order=flip	Order
|sing=		Deprecated. Use |adj=	Plurals

 Deprecated options

This list:   

Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.

• abbr=comma is deprecated. Use comma=off instead
• abbr=mos, setting range separators, is deprecated (not MOS compliant). Use |by| or |x| instead
• adj=1 is deprecated. No need to deviate from MOS regarding plurals
• adj=flip is deprecated. Use order=flip instead
• adj=j is deprecated. No need to use NBSP before full unit name. See MOS
• adj=nocomma is deprecated. Use comma=off instead
• disp=2 is deprecated. Use disp=output only instead
• disp=5 is deprecated. Use round=5 instead
• disp=flip is deprecated. Use order=flip instead
• disp=flip5 is deprecated. Use |order=flip |round=5 instead
• disp=nocomma is deprecated. Use comma=off instead
• disp=slash, disp=s, disp=/ are deprecated. Use disp=or instead
• disp=u2 is deprecated. Use disp=unit2 instead
• near=5 is deprecated. Use round=5 instead
• sing= is deprecated in any situation. Use adj= instead
• Range separator |xx| is deprecated (not MOS compliant). Use |x| instead
• Range separator |*| is deprecated (not MOS compliant). Use |x| instead
• Range separator |&| is deprecated. Use |and| instead
• Range separator |to-| is deprecated. Use |to(-)| instead

 TemplateData

This is the TemplateData documentation for this template used by VisualEditor and other tools.

Convert

Converts measurements to other units.

وسائط القالب

وسيط		وصف	نوع	حالة
value	1	the value to convert	رقم	اختياري
from unit	2		سطر	اختياري
to units	3	the unit to convert into	سطر	اختياري
precision or suffix	4	significant digits after decimal dot or, if negative, exponent of ten	رقم	اختياري
link units	lk	“on” all, “in” input, “out” output or “off” no units غيابي off	سطر	اختياري
abbreviation	abbr	display for the units: “on” unit symbols, “off” all unit names in full words, “in” input unit symbol, “out” abbreviated output units, “values” no units at all غيابي out	سطر	اختياري
spelling	sp	“us” display U.S. spelling of unit names	سطر	اختياري
adjective	adj	adjective form (singular unit name appended by hyphen) “on” or “mid” to put conversion at end	سطر	اختياري
conversion	disp	display conversion result: “or” after ‘or’, “x” with custom prefix and suffix, “b” in parentheses, “table”/“tablecen”, “output only” alone, “output number only” alone and without unit, “unit” not at all but input unit; if the value is a number it is used as precision غيابي b	سطر	اختياري
ordering	order	“flip” returns converted value first, input value second.	سطر	اختياري
significant figures	sigfig	number that sets the number of significant figures	رقم	اختياري
rounding output	round	“5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range	سطر	اختياري
thousands separator	comma	Sets or suppresses thousand separator in the numbers. “off” = no separator; “gaps”: use space not comma; “5” and “gaps5”: only add separator when number > 5 positions (10,000 or more) غيابي on	سطر	اختياري
sort key	sortable	“on” generates a hidden sort key	سطر	اختياري

 See also