طارة ستانفورد

Exterior view of a Stanford torus. Bottom center is the non-rotating primary solar mirror, which reflects sunlight onto the angled ring of secondary mirrors around the hub. Painting by Donald E. Davis

Interior of a Stanford torus, painted by Donald E. Davis.

طارة ستانفورد Stanford torus هي تصميم مقترح من NASA design^[1] for a space settlement capable of housing 10,000 to 140,000 permanent residents.^[2]

The Stanford torus was proposed during the 1975 NASA Summer Study, conducted at Stanford University, with the purpose of exploring and speculating on designs for future space colonies^[3] (Gerard O'Neill later proposed his Island One or Bernal sphere as an alternative to the torus^[4]). "Stanford torus" refers only to this particular version of the design, as the concept of a ring-shaped rotating space station was previously proposed by Konstantin Tsiolkovsky ("Bublik-City", 1903),^[5] Herman Potočnik (1923)^[6] or Wernher von Braun (1952),^[7] among others.

It consists of a torus, or doughnut-shaped ring, that is 1.8 km in diameter (for the proposed 10,000 person habitat described in the 1975 Summer Study) and rotates once per minute to provide between 0.9 g and 1.0 g of artificial gravity on the inside of the outer ring via centrifugal force.^[8]

Sunlight is provided to the interior of the torus by a system of mirrors, including a large non-rotating primary solar mirror.

The ring is connected to a hub via a number of "spokes", which serve as conduits for people and materials travelling to and from the hub. Since the hub is at the rotational axis of the station, it experiences the least artificial gravity and is the easiest location for spacecraft to dock. Zero-gravity industry is performed in a non-rotating module attached to the hub's axis.^[9]

The interior space of the torus itself is used as living space, and is large enough that a "natural" environment can be simulated; the torus appears similar to a long, narrow, straight glacial valley whose ends curve upward and eventually meet overhead to form a complete circle. The population density is similar to a dense suburb, with part of the ring dedicated to agriculture and part to housing.^[9]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Construction

The torus would require nearly 10 million tons of mass. Construction would use materials extracted from the Moon and sent to space using a mass accelerator. A mass catcher at L2 would collect the materials, transporting them to L5 where they could be processed in an industrial facility to construct the torus. Only materials that could not be obtained from the Moon would have to be imported from Earth. Asteroid mining is an alternative source of materials.^[10]

General characteristics

Location: Earth–Moon L5 Lagrangian point
Total mass: 10 million tons (including radiation shield (95%), habitat, and atmosphere)
Diameter: 1,790 m (1.11 mi)
Circumference: 5,623.45 m (3.49 mi)
Habitation tube diameter: 130 m (430 ft)
Spokes: 6 spokes of 15 m (49 ft) diameter
Rotation: 1 revolution per minute
Radiation shield: 1.7 meters (5.6 feet) thick raw lunar soil

Gallery

Stanford torus configuration
Stanford torus structural cross section
Transportation system for the torus construction (1975)
A torus expanding from interconnected bolas or dumbbells
A NASA lunar base concept with a mass driver (the long structure that extends toward the horizon)
External view of a Stanford torus with some of the radiation-shielding "chevron" mirrors removed to show interior space
Cutaway view of a Stanford torus